Mike think this would do a good a candidate for hack my mod. Mine is on the way but don't really like the carbon fiber battery tube. Found a place that you can get brass tubes in different sizes cut to length. Great review. But you could drill a couple of holes in the top of the battery tube to help vent. I think will vent a bit at the seam between tube and mod frame.
Hey Mike awesome review as always. I really like the look of this mod, but this is a great reason why to look through reviews when and before purchasing something. I am not a fan of that rattle. But as for the ventilation, I did notice two screws at the bottom of the battery lid, can that be venting through the top via the little handle hinges on the sides? Just a thought…
Vapecell, iJoy, Efest and some others uses a multi-layer paper top ring insulator which shouldn't get wet from juice, it can cause it to swell or get soft causing them to short. Not sure about the others I would check first, but I know for sure Sanyo does not use paper insulators!! Good review!!
Bought one this week, the battery cap now has 4 venting holes and I got the version where the carbon fibre sleeve is replaced by the same material and colour as the switch. Looks a lot better.
Currently awaiting my delivery for my amber/brass Furyan. I'm going to go ahead and seal the brass with Birchwood Casey gun stock wax, that should alleviate finger print/smudges. On Lost Vape website it clearly states it's for an experienced user, steam engine is a dummy proof FREE resource for builders and should be utilized on any/all rebuildable atomizers. The design of this mod alone puts it in a different tier, let's face it 9 out of 10 squonks are made from 3D printed delrin or abs plastic (cheap) I purchased this solely based on their reputation for being a high end manufacturer. I can't wait for my delivery!
Don't buy this furyan shit mod!!! I just received this mod 2 days ago and it doesn't firing well! The fire button is SUCKS!!! It's often fail to firing!!! Please Lost Vape, don't sell garbage to your customer!!!
Mike it’s on the way. Hopefully they listened to the reviewers and added the battery vents.
Mike think this would do a good a candidate for hack my mod. Mine is on the way but don't really like the carbon fiber battery tube. Found a place that you can get brass tubes in different sizes cut to length. Great review. But you could drill a couple of holes in the top of the battery tube to help vent. I think will vent a bit at the seam between tube and mod frame.
How better than a squeezer or luxotic is?
Hey Mike awesome review as always. I really like the look of this mod, but this is a great reason why to look through reviews when and before purchasing something. I am not a fan of that rattle. But as for the ventilation, I did notice two screws at the bottom of the battery lid, can that be venting through the top via the little handle hinges on the sides? Just a thought…
Hey Mike – They're in stock at PureCoils if anyone wants them stateside – https://www.purecoils.com/products/the-furyan-by-lost-vape
Hi Mike, does your recurve sit flush on the Furyan as mine has a 1mm gap
Dude that setup is sexy af. I'm getting one!
Vapecell, iJoy, Efest and some others uses a multi-layer paper top ring insulator which shouldn't get wet from juice, it can cause it to swell or get soft causing them to short. Not sure about the others I would check first, but I know for sure Sanyo does not use paper insulators!! Good review!!
The door rattle could be fixed with some treading tape
What was the build he using? Help!
Bought one this week, the battery cap now has 4 venting holes and I got the version where the carbon fibre sleeve is replaced by the same material and colour as the switch. Looks a lot better.
Been using the furyan on a recurve atty with the coils that came with it, firing button getting hot
No venting? No way.
no reviewer watched the Riddick movie
Grimm, Jai and Mike are all busy people
Love em all though
Mike, what drip tip are you using on your recurve rda? I would love to get my hands on it, since i bought the gold version of the recurve rda.
Currently awaiting my delivery for my amber/brass Furyan. I'm going to go ahead and seal the brass with Birchwood Casey gun stock wax, that should alleviate finger print/smudges. On Lost Vape website it clearly states it's for an experienced user, steam engine is a dummy proof FREE resource for builders and should be utilized on any/all rebuildable atomizers. The design of this mod alone puts it in a different tier, let's face it 9 out of 10 squonks are made from 3D printed delrin or abs plastic (cheap) I purchased this solely based on their reputation for being a high end manufacturer. I can't wait for my delivery!
Btw hot wing sauce/vinegar or cheap ass white tooth paste can clean just about all metals. No cleaner needed.
Mike what drip tip you got on that recurve to be so matchy matchy?
Don't buy this furyan shit mod!!!
I just received this mod 2 days ago and it doesn't firing well!
The fire button is SUCKS!!!
It's often fail to firing!!!
Please Lost Vape, don't sell garbage to your customer!!!
KNOWN MISFIRING ISSUES AND ARCING ISSUES ON THE BUTTON WITH THIS MECH MOD. PURCHASE WITH CAUTION!
Is it better to use 50a battery in mech mod?
"I love ultem, don't sue me" lol
"Few-rie-yann", from the movie of vin diesel. Pitch black, the riddick chronicles
Put a oring at the bottom works perfect no rattle
Is it ok to inserting a Extension sir for better clouds ?