You think maybe the burnt taste you got Zophie off the one coil was from when you dry fired it? Noticed in the vid that they dry fired the one coil and I know with pre-made coils usually after one burnt hit with old or new coils that coil is shot because it never wicks right or the flavor is never the same afterwards. Great review either way love your vids and let's face it you're not hard on the eyes.
The only point I see on that external battery is to sell it more expensive than a regular battery. Of course, If you are not an expert is a good way to stop users to go for bad or cheap batteries but I really don't think this mod is pretended as a starter. Great review Zophie
whoever who cares if she has done ski it's her choice you guys just need to stop telling her what to do if you don't like your videos you should get off
Sophie the FDA doesn't know what they're talking about and they have not even checked there information right time really bummed out but keep in watching your videos on keeps me for the good videos in the I wanted to say u that I vape now instead of smoking and get the Smok modboxs
Cool innovative battery design. Not a big fan of single battery mods since I tend to run at 5.5v – 7v. Maybe you can suggest to Innokin to create a dual or even tri batt attachment…talk about expandability!
Hey Zophie that is fascinating that you were born in poland so neat. I think you sound fine by the way.But I am concerned that you mentioned you lost a lot of weight.Hun you were in fine shape before and I dare say really not overweight so I hope the weight loss was not because of a bad thing.I care really,I'm a fellow human and it would be a sad way to be to not have compassion for my fellow people. Much luv sent your way…
Realize you totally know what you're doing & am NOT in any way trying to sound like a smart ass or anything like that (hard to determine 'tone' in text, so wanted to make sure you knew it only comes from place of <3 & vaper to vaper) but… because you tend to use drippers & build, etc…. not use sub-ohm tanks on the regular.. Was gonna say that sometimes, they don't make a proper connection because they aren't assembled/together tightly enough. Listening more. heard you mention trying to adjust airflow & entire tank spun, started coming apart…. which only shows it realllllly needs to be a lot more snug. Being sure coil is threaded properly & quite snugly….. & after priming coil w/ a few drops down center… put tank together, again.. quite snugly. I try to hold everything in place, if needed.. when opening top to fill (of course, after closing off AFC… esp if there's already liquid inside…. in order to maintain that internal vacuum pressure that helps it wick/feed properly pull to pull AND keeps all your liquid inside, where it belong) WIthout overfilling, re-seal & open afc again… Same w/ changing coil.. I tend to personally, hold rest together, kinda…. & open just base to swap out coil. Should never come apart OR need to take glass off ,etc… when opening bottom. Pretty sure that, if all was put together/assembled tightly… it would've performed a LOT better. As you mentioned, Innokin=known for quality & accuracy…. so it's more probable something was just loose/not making connection. As for the RBA deck. phew, that thing is tiiiiiiny. As you know if those coils touch the side…. "done-ski" =p short. I'm sure you pulled long wicks up, put cap on & then cut/stuffed 'em? Same would apply for how that got put into the sub-ohm tank. Pretty darn snugly… can check before putting all together/filling if it reads on device OR ohm-reader, to ensure it is making connection. (have that issue sometimes when using other than stock coils in tobeco super tank mini.. so started checking BEFORE I put it ALL together, fill it up, etc… Only to need to then empty everything & start over. lol) Live & learn… Since you don't use tanks regularly… just something you might want to check/consider….. since you prob would get better performance from ALL aspects… whether stock coil OR rba section, which you know how to build, etc… very well. 🙂 Hope it got better for ya! (noticed you did like the longer drip tip… I just love the look of it stubby.. tho it prob gets too hot that-a-way. boooo) The short/stealthy is definitely a good look…… sucks that it didn't work well for ya. =/ Hope all that helps somehow. Thanks for sharing!! OH & PS: Have heard U mention the ohms reading thing many times now & keep forgetting to mention this: Any stock tank coil from the factory, will be made to, say.. 0.5 ohms. Thing is, it has an allowable tolerance either way.. where it's still OK & "within spec". Something like 0.44-0.53 ish… would be totally acceptable. In addition, each/every device, ohm reader, etc.. is also gonna be reading that same coil differently too. Yep. Some read only to certain place, 10th's.. 100th's….. some round up or down, while others… just drop off one of the ending digits, depending. Rarely will ya see one that's dead- on & exactly.. what it says…. As long as it's not a 0.5 ohm coil reading… like 0.9 or something… it's good & you're good to go. Nothing wrong w/ it. ENJOY!!! Live long(ER) & vape on!
I found a price on this device http://www.gearbest.com/disrupter-_gear/
Great vid Zophie. Mod looks like a winner.
The original Disrupter was a total fail, and this one will be toooo.
great review, thanks zophie
You think maybe the burnt taste you got Zophie off the one coil was from when you dry fired it? Noticed in the vid that they dry fired the one coil and I know with pre-made coils usually after one burnt hit with old or new coils that coil is shot because it never wicks right or the flavor is never the same afterwards. Great review either way love your vids and let's face it you're not hard on the eyes.
The only point I see on that external battery is to sell it more expensive than a regular battery. Of course, If you are not an expert is a good way to stop users to go for bad or cheap batteries but I really don't think this mod is pretended as a starter. Great review Zophie
i want to kiss her face and neck all day
Had bad Innokin tanks out of the box too.
The original disrupter was my starter mod.
I love your videos even tho i dont really get any of these items, happy with my rx200s and kennedy, but the juice videos give me somthing new to try 🙂
Zophie or whatever your real name is, I just come here to look at your pretty face, thanks for the review it's a bounus. 😉
whoever who cares if she has done ski it's her choice you guys just need to stop telling her what to do if you don't like your videos you should get off
Im not getting your notifications
thank you both, I'll be keeping that in mind. I do know mistakes can happen with anything. ?
"Done-ski" It gets me every time, Love it
Great review Zophie
Thanks
Another great job girl keep on making those videos
Sophie the FDA doesn't know what they're talking about and they have not even checked there information right time really bummed out but keep in watching your videos on keeps me for the good videos in the I wanted to say u that I vape now instead of smoking and get the Smok modboxs
You must have gotting Friday afternoon tanks or Monday morning .
Cool innovative battery design. Not a big fan of single battery mods since I tend to run at 5.5v – 7v. Maybe you can suggest to Innokin to create a dual or even tri batt attachment…talk about expandability!
Luv u and ur vids! Thanks Zophie
Nice review thanks.
Thanks Zophie.
Hey Zophie that is fascinating that you were born in poland so neat. I think you sound fine by the way.But I am concerned that you mentioned you lost a lot of weight.Hun you were in fine shape before and I dare say really not overweight so I hope the weight loss was not because of a bad thing.I care really,I'm a fellow human and it would be a sad way to be to not have compassion for my fellow people. Much luv sent your way…
I thought she was holding a giant version of this mod.
Realize you totally know what you're doing & am NOT in any way trying to sound like a smart ass or anything like that (hard to determine 'tone' in text, so wanted to make sure you knew it only comes from place of <3 & vaper to vaper) but… because you tend to use drippers & build, etc…. not use sub-ohm tanks on the regular.. Was gonna say that sometimes, they don't make a proper connection because they aren't assembled/together tightly enough. Listening more. heard you mention trying to adjust airflow & entire tank spun, started coming apart…. which only shows it realllllly needs to be a lot more snug. Being sure coil is threaded properly & quite snugly….. & after priming coil w/ a few drops down center… put tank together, again.. quite snugly. I try to hold everything in place, if needed.. when opening top to fill (of course, after closing off AFC… esp if there's already liquid inside…. in order to maintain that internal vacuum pressure that helps it wick/feed properly pull to pull AND keeps all your liquid inside, where it belong) WIthout overfilling, re-seal & open afc again… Same w/ changing coil.. I tend to personally, hold rest together, kinda…. & open just base to swap out coil. Should never come apart OR need to take glass off ,etc… when opening bottom. Pretty sure that, if all was put together/assembled tightly… it would've performed a LOT better. As you mentioned, Innokin=known for quality & accuracy…. so it's more probable something was just loose/not making connection. As for the RBA deck. phew, that thing is tiiiiiiny. As you know if those coils touch the side…. "done-ski" =p short. I'm sure you pulled long wicks up, put cap on & then cut/stuffed 'em? Same would apply for how that got put into the sub-ohm tank. Pretty darn snugly… can check before putting all together/filling if it reads on device OR ohm-reader, to ensure it is making connection. (have that issue sometimes when using other than stock coils in tobeco super tank mini.. so started checking BEFORE I put it ALL together, fill it up, etc… Only to need to then empty everything & start over. lol) Live & learn… Since you don't use tanks regularly… just something you might want to check/consider….. since you prob would get better performance from ALL aspects… whether stock coil OR rba section, which you know how to build, etc… very well. 🙂 Hope it got better for ya! (noticed you did like the longer drip tip… I just love the look of it stubby.. tho it prob gets too hot that-a-way. boooo) The short/stealthy is definitely a good look…… sucks that it didn't work well for ya. =/ Hope all that helps somehow. Thanks for sharing!! OH & PS: Have heard U mention the ohms reading thing many times now & keep forgetting to mention this: Any stock tank coil from the factory, will be made to, say.. 0.5 ohms. Thing is, it has an allowable tolerance either way.. where it's still OK & "within spec". Something like 0.44-0.53 ish… would be totally acceptable. In addition, each/every device, ohm reader, etc.. is also gonna be reading that same coil differently too. Yep. Some read only to certain place, 10th's.. 100th's….. some round up or down, while others… just drop off one of the ending digits, depending. Rarely will ya see one that's dead- on & exactly.. what it says…. As long as it's not a 0.5 ohm coil reading… like 0.9 or something… it's good & you're good to go. Nothing wrong w/ it. ENJOY!!! Live long(ER) & vape on!
I'm new to this and tired of leaking problematic cleromizers, what the hell should I get that is bulletproof