Ugh…looks like going back to the days of the ego and trying to keep those coils alive or vaping better than they came from factory. RIP people with fat fingers.
Nice video Mike, different than the others. I like watching new stuff presented by my main man!!! Thanks for your work malaka!!! Your loyal peep from Athens!!!
Heh.. the only scenario I see myself doing this is if the world went to shit and I couldn't go out and buy or order a new pod and that pod system was all I had left to vape on. It's already a pain in the ass to rebuild on most RDAs out there… doing micron surgery on a tiny pods coil is just silly.
Mike is the gage of the wire 28g? As I was just about to make my own coil and use a muji pad. Plus how many wraps and mm if you can help me. Thanks again and Good Job ?? I still think the best is to buy a pack of 4 but if I get it right. It will save me loads. I have about 10 used pods here. Thanks again ???
ive been watching vape vids and vaping since the beginning, i recently had to quit vaping because it was rotting my teeth and causing gum retention really terrible pain in my mouth, keep doing what ur doing bro be careful everyone..
Mike I tried this myself 2 months ago. But at that time there was no any prebuilt coil available so I had to round my 28g wire and it Didnt work well. But later I came to notice that this Calliburn built is complex and it has added wire. Well you really did same like me by placing juice holes aside. Lol.
Appreciate your attempt. This reminds me of my experiment. M gonna get these sooner to build. Meanwhile pls share your feedback of experience of vaping comparing to factory made ones. Quality / flavour / Nic hit. ??? What is your experience. Pls do share. Thank you
This was a awesome video mike, especially during these times we are in. Can’t wait for the show tomm brother and I hope you and yours are safe there in ny!!*edit* I typed that message out while you were still building the coil and I see you mentioned the exact same thing at the end if the video. I guess great minds think alike ?
Great Vid Mike !! you did pretty well for the 1st try Bringing back BAD memories from the "old days" LOL next they'll bring back carto tanks that we'll have to punch out. LMAO for me i'd rather rebuild my rda's & rta's !!
Yeah man its getting hard to find caliburn pods online. Only thing is how well these will last and will u get bad dry hits or burnt hits after a couple days?? Hmm idk lol but its fun to watch you struggle for once mikey! Buwhahaha? Hope u do more of these! Like the smok rpm40/80 /fetch etc etc etc etc
It’s a fabulous idea for sure?? If cash is tight, this is the way to go And with pod shortages, it’s a good idea to have a kit around. I want one for the Caliburn just to see if I can do it and also to have just in case. I always thought the Caliburn hit slightly harder when using the fire button as opposed to auto draw, I’m glad you mentioned it Mike. Good job and well done, thank you ?????
Mike U should get ST or the Blunt boys to help you roll that cotton tight!!! Like rolling a J Baby!!??
Great job Mike Vapes!!!
Hard pass. But I appreciate your doing the video. Thank you
Ugh…looks like going back to the days of the ego and trying to keep those coils alive or vaping better than they came from factory. RIP people with fat fingers.
Nice video Mike, different than the others. I like watching new stuff presented by my main man!!! Thanks for your work malaka!!! Your loyal peep from Athens!!!
Seems like they did that for a major reason
.
I think and I am no means anybody this is just in my head.
I think either we are about to get cracked down on or cut off when it come to that certain supply chain.
I hope its all in my head but the way things are going now that's what it looks like to me I could be totally wrong.
Heh.. the only scenario I see myself doing this is if the world went to shit and I couldn't go out and buy or order a new pod and that pod system was all I had left to vape on. It's already a pain in the ass to rebuild on most RDAs out there… doing micron surgery on a tiny pods coil is just silly.
How’s the flavor on the kanthal Mike? I feel like Uwell uses better wire & cotton then most Chinese companies ??♂️
Mike is the gage of the wire 28g? As I was just about to make my own coil and use a muji pad. Plus how many wraps and mm if you can help me. Thanks again and Good Job ?? I still think the best is to buy a pack of 4 but if I get it right. It will save me loads. I have about 10 used pods here. Thanks again ???
ive been watching vape vids and vaping since the beginning, i recently had to quit vaping because it was rotting my teeth and causing gum retention really terrible pain in my mouth, keep doing what ur doing bro be careful everyone..
Mike I tried this myself 2 months ago. But at that time there was no any prebuilt coil available so I had to round my 28g wire and it Didnt work well. But later I came to notice that this Calliburn built is complex and it has added wire.
Well you really did same like me by placing juice holes aside.
Lol.
Appreciate your attempt. This reminds me of my experiment. M gonna get these sooner to build. Meanwhile pls share your feedback of experience of vaping comparing to factory made ones. Quality / flavour / Nic hit. ??? What is your experience. Pls do share. Thank you
Mike..just love your videos man..so helpful thanks allot.
Para gente que tenga buena ? vista y muy manitas?
This was a awesome video mike, especially during these times we are in. Can’t wait for the show tomm brother and I hope you and yours are safe there in ny!!*edit* I typed that message out while you were still building the coil and I see you mentioned the exact same thing at the end if the video. I guess great minds think alike ?
Thanks mike definitely don’t order from Coil Master been waiting three weeks so far order in limbo land
Wow pretty cool it reminds me of when I used to rebuild my aspire coils for my Atlantis tank really easy to do great job my friend ????????
Seems like a pain in the ass lol good luck to those brave enough to try these kits.
In my mid 60's my eyesight and hands wouldn't let me get along very well with this, but thank you for showing what is available for people to save $.
I don't think I'm even going to try this. Thanks for going through all the struggle for us, Mike! ?
Great Vid Mike !! you did pretty well for the 1st try
Bringing back BAD memories from the "old days" LOL
next they'll bring back carto tanks that we'll have to punch out. LMAO
for me i'd rather rebuild my rda's & rta's !!
Hey Mike great review ? I watched zophie build the same stuff she messed her finger up but they worked lol
Yeah man its getting hard to find caliburn pods online. Only thing is how well these will last and will u get bad dry hits or burnt hits after a couple days?? Hmm idk lol but its fun to watch you struggle for once mikey! Buwhahaha?
Hope u do more of these! Like the smok rpm40/80 /fetch etc etc etc etc
It’s a fabulous idea for sure??
If cash is tight, this is the way to go And with pod shortages, it’s a good idea to have a kit around.
I want one for the Caliburn just to see if I can do it and also to have just in case.
I always thought the Caliburn hit slightly harder when using the fire button as opposed to auto draw, I’m glad you mentioned it Mike.
Good job and well done, thank you ?????
It will be nice to make a set for dotmod pod because you need 3€ for one coil
Great review/Presentation type thingy Segment. ???