Sticking fire button is a huge NO! Vandy Vape well aware of this issue but continue to sell the mod. Apart from the dishonesty its a fecking safety issue.
"Build quality is amazing"..cmon this device autofire after you have used it couple times. Maybe you should test these devices little longer next time?
A great squonker had mine for about two weeks or so. I don"t use the little tool and don"t know what it's for either. Just give the tool along with the micro USB"s to Steve. Thanks for the review Mike
I prefer using the original Pulse squonk bottle with my V2. The metal tube on the inside of the new bottle drives me nuts when I'm squonking. Plus filling from the top with the 30ml silicon bottle VV use to sell is way better and faster. Unfortionately, you can't fit the original Pulse bottle and the bottom fill cap, so you have to do without the cap. Kind of wierd having the bottle showing from underneath and it possibly slipping through. It stays fairly tight, but you never know. You should be able to screw on the bottom cap to the frame, but you can't. Shitty design choice.
I had the v1 for a long time and bought the v2 a few weeks back. It is a massive improvement over an already great mod. Nitpicking, how do I put this politely, you have chunky fingers, it's not so bad if you don't though I can totally see why it might be annoying though I suspect. Still, certainly for me an improvement of top filling or pulling the bottle out which used to always end up with me covered in juice. The menu system is kinda annoying though the stuff is fairly well covered by the app, it's not a great app by any stretch but it works. The doors on mine are a bit tight though for me makes them feel more secure though the magnets are much stronger in the v2 than the v1 and I never had an issue with that on the v1. Other than that I love it and the 21700 + 20700 support is nice over just the 20700, when I next go to buy batteries for sure they'll be 21700. I have no clue what the tool is for – lifting the bottle tab, pulling the doors off, if you have no nails?
I got 2 of them and both leak a bit from the bottom, it seems that a lot of people have the same problem. I don’t even fill from there, I use a vandy vape refill bottle from the top tread.
I still use my black single Recurve on the Pulse X, and definitely picking this up in black G10. excellent review.
Great review Mike V. Thanks for stayin relevant and keep the videos comin!
I wish it came with some sort of RDA throw the Mesh v2 RDA make it a kit some how
Holding it upside down to fill, make sure your rda is pretty dry or juice will come out the drip tip. Kinda dumb idea.
I went through TWO of these. The fire button broke both times.. other then that great device but I would not recommend for heavy users!!!!!
Anyone one the money shot rda. What's a good build for flavor
The Backside.
Hey mike it looks like that little tool thingy is probably for that juice bottle to pry it up so you can twist it out
Tool lifts bottom cap for folks with no nails.
Got my one delivered today
Sticking fire button is a huge NO! Vandy Vape well aware of this issue but continue to sell the mod. Apart from the dishonesty its a fecking safety issue.
Trash device with a fire button that sticks and auto-fires. Stay away from this.
There is serious autofire problem with this mod.. Pulse Dual was same thing. Total garbage ?️
"Build quality is amazing"..cmon this device autofire after you have used it couple times. Maybe you should test these devices little longer next time?
people are saying the firing button get stuck on a lot of them is this true ?
“The bottom side”
This had me laughing in vaping nerd so hard.
A great squonker had mine for about two weeks or so. I don"t use the little tool and don"t know what it's for either. Just give the tool along with the micro USB"s to Steve. Thanks for the review Mike
Is anyone else having problems with it leaking slowly? Or am I the only one who got one with bad threads?
You should sell the OG Recurve again. I but they could sell a full run.
Hi mike vapes do you have now a geekvape aegis boost plus rdta?
Just grabbed the g10 obsidian version and I agree its a nice material in the paw thanks Mike
My pulse dual buttons are not responding
I prefer using the original Pulse squonk bottle with my V2. The metal tube on the inside of the new bottle drives me nuts when I'm squonking. Plus filling from the top with the 30ml silicon bottle VV use to sell is way better and faster. Unfortionately, you can't fit the original Pulse bottle and the bottom fill cap, so you have to do without the cap. Kind of wierd having the bottle showing from underneath and it possibly slipping through. It stays fairly tight, but you never know. You should be able to screw on the bottom cap to the frame, but you can't. Shitty design choice.
I had the v1 for a long time and bought the v2 a few weeks back. It is a massive improvement over an already great mod. Nitpicking, how do I put this politely, you have chunky fingers, it's not so bad if you don't though I can totally see why it might be annoying though I suspect. Still, certainly for me an improvement of top filling or pulling the bottle out which used to always end up with me covered in juice. The menu system is kinda annoying though the stuff is fairly well covered by the app, it's not a great app by any stretch but it works. The doors on mine are a bit tight though for me makes them feel more secure though the magnets are much stronger in the v2 than the v1 and I never had an issue with that on the v1. Other than that I love it and the 21700 + 20700 support is nice over just the 20700, when I next go to buy batteries for sure they'll be 21700. I have no clue what the tool is for – lifting the bottle tab, pulling the doors off, if you have no nails?
I got 2 of them and both leak a bit from the bottom, it seems that a lot of people have the same problem. I don’t even fill from there, I use a vandy vape refill bottle from the top tread.