not the best review, mainly because you missed out on allot of things in your review. and your build feels to risky for anyone to copy. please work on that
If you grip each side on that ring and tighten it down real good it won't loosen and stops being a pain. They made it removable because some people like to remove it. I removed it on the chuthulu mod that was out before the griffin which was very similar.
Thank you so much for an honest, quality review from the builders angle! Everything from the deck review to the coil install is on point! You are awesome zophie please keep the reviews coming! Super grateful from Philly!
Just got one on a closeout from a local shop for far less than I could get it online. First time wrapping coils ( done using a jeweler's screwdriver without a coil jig totally by hand. Came out at precisely 0.25 Ohms and heated evenly immediately ( Attention to detail folks ). No leaking due to the way I did the cotton. airflow is very nice flavor nice and it does chuck some clouds. Running at 60 watts on a Cuboid that is updated to 200 watts through firmware ( probably bursting to get that from two batteries.). Smokes perfectly with just a minimal spitting. I probably flooded it during the build. The hardest part is getting the ring back on after building and wicking.
I have a question. I don't understand the "strumming" of the coils and how that does anything. Ive seen you and many other people on YouTube do that and you are the only one so far to attempt an explanation of this technique. Ive been building micro coils from kanthal for years, and am moving into bigger decks and trying to learn all the new stuff.
I’m assuming she is getting paid to review these rta but she still tells you the real problems you have with the tanks . I got the Zeus because it doesn’t leak and I think this would be a good choice for my 2nd rta
I actually bought the Griffin 25 RTA because of this video. It's funny how it took me two years to notice that you put that annoying cotton ring on "off camera"…LOL!!! I was watching the video just now thinking, "There is no way she's going to get that ring over those fatass coils." Then suddenly, the ring appeared. Oh my, the deception! Also, even two years ago, who the hell has/had a problem with dry burning your coils? Those are the types to complain about their juice tasting shitty not realizing that it's because their builds have hot spots. Oh yeah. That shit makes a HUGE difference.
I have one of these, I always get dry hit issues no matter what I do, every build I've done dry hit, if I use loads of cotton or fuck all cotton dry hit, pile of crap mate if you ask me 🙁
thanks! "CASA dos Vapers Brazil" I've learned I lot watching this video!
why would u get a dry hit with to much cotton ?
New vaper, how long do these type of coils last?
hey sofie which mode box do you use in the video ?
not the best review, mainly because you missed out on allot of things in your review. and your build feels to risky for anyone to copy. please work on that
If you grip each side on that ring and tighten it down real good it won't loosen and stops being a pain. They made it removable because some people like to remove it. I removed it on the chuthulu mod that was out before the griffin which was very similar.
What diameter did you use for the coils? I have the griffin RTA too and with ss316L 3mm diameter I just cannot get it to not dry hit
Running it at 25w ? I don't think so !! I have near as this the same build on a dna200 running perfectly at 80-90w. 25w doesn't even heat the coils.
"Alien Clapton Coil Build Tutorial" in the name and then you do nothing but unpack and install pre-made coils? the audacity…
Thank you so much for an honest, quality review from the builders angle! Everything from the deck review to the coil install is on point! You are awesome zophie please keep the reviews coming! Super grateful from Philly!
Zophie Is the Griffin 25 RTA compatible with the Joytech Cuboid 150w Mod?
i love u zophie
which cotton are you using? and where can I get it? tks.
what was the hot spot? the red line going across or the black at the end that wasn't firing up?
Sophia, just curious since I'm 64 years old, how did you learn all of the vaping details that you know? You are the greatest !!
Just got one on a closeout from a local shop for far less than I could get it online. First time wrapping coils ( done using a jeweler's screwdriver without a coil jig totally by hand. Came out at precisely 0.25 Ohms and heated evenly immediately ( Attention to detail folks ). No leaking due to the way I did the cotton. airflow is very nice flavor nice and it does chuck some clouds. Running at 60 watts on a Cuboid that is updated to 200 watts through firmware ( probably bursting to get that from two batteries.). Smokes perfectly with just a minimal spitting. I probably flooded it during the build. The hardest part is getting the ring back on after building and wicking.
I have a question. I don't understand the "strumming" of the coils and how that does anything. Ive seen you and many other people on YouTube do that and you are the only one so far to attempt an explanation of this technique. Ive been building micro coils from kanthal for years, and am moving into bigger decks and trying to learn all the new stuff.
What's the difference between alien Clapton an fused Clapton
I’m assuming she is getting paid to review these rta but she still tells you the real problems you have with the tanks . I got the Zeus because it doesn’t leak and I think this would be a good choice for my 2nd rta
im sorry but i think you are so gorgeous, and your voice, its so unique and easy to rremember….
I talked to that little ring….. It said it doesn't like you either
I actually bought the Griffin 25 RTA because of this video. It's funny how it took me two years to notice that you put that annoying cotton ring on "off camera"…LOL!!! I was watching the video just now thinking, "There is no way she's going to get that ring over those fatass coils." Then suddenly, the ring appeared. Oh my, the deception! Also, even two years ago, who the hell has/had a problem with dry burning your coils? Those are the types to complain about their juice tasting shitty not realizing that it's because their builds have hot spots. Oh yeah. That shit makes a HUGE difference.
I have one of these, I always get dry hit issues no matter what I do, every build I've done dry hit, if I use loads of cotton or fuck all cotton dry hit, pile of crap mate if you ask me 🙁
I just subscribed cause girl u so pretty ?? lemme hola at u
You look like you smoke a lot of weed! Just sayin