Worst MTL I have. The air flow is way to open for an MTL draw. I have it set on the 0.8 opening, stuffed a 3mm coil in it and still had to cover one of the airflow openings at the bottom with a piece of tape to even start to get close to an MTL draw. Gonna have to call BS on this review.
Nice review Mike! Concerning the airflow I believe Matt said he himself notices the difference pretty good and he's going to see if it's an issue with the batch that was send out. Nonetheless, great review and indeed a sexy looking rta
I just got one and I don't agree that the chimney can be taken apart for cleaning. I tried and it was so tightly screwed down that it wouldn't budge either direction and it started to strip that screw nut thingy and it started making plastic sounds that made me think that it was about to break. Not a single review I've seen on this had it broken down. It's it reverse or standard threaded?
Yep the only two points that l don’t like about this rta is one , the 5 airflow options are barely noticeable and two , the plastic tank . The airflow options being pretty minimal ain’t a biggie for me but l really hate plastic tanks . Will hold off for a while and see how others get on with the plastic tank to see if it crazes or cracks . I use fruit vapes so the acidity may damage it . Great review and a nice change for a mtl with at least a different take on the airflow .
Mike: I did manage to fit a 24ga, 3mm coil in. But it was very tight. I agree with you about the air flow adjustability. I'm looking for a single 18650 mod with type C charge for it. Do you have a favorite? Stay healthy and happy.
Yep, i agree. Before anyone publicly said anything i noticed it myself here at home like right away. It vapes great. Just they kinda missed the mark naming it cog and the whole point is different af by spinning it. But its seriously a great mtl vape and cheap so i like to look for silver linings and its good. I personally notice like 3 different changes but they're so similar its hard to say. It's basically 1 af. Def has me lookin for the Ares V2 tho i like to adjust my mtl. Thanks Mike!
PCTG was developed to stop the leaching of Bisphenol A into whatever liquid it contains. It is more expensive and considered food safe. You made want to do a rethink on poly-carbonate (PC) tanks.
This is by far one of the best mtl rta's that has released in a while. I havent put mine down since getting it. I've been using it over my kayfun lite, If anyone wants a great mtl rta this is it
Good flavour, looks great, but is a little too airy for me. It has still made my rotation for the above reasons, but I expected a "proper" MTL as Mark Todd would say. Nice one though Mike!
That's y u can't feel the airflow difference coz it's only a .2 difference from setting to setting. But trust me an experienced mtl vaper can tell them apart
solid
Worst MTL I have. The air flow is way to open for an MTL draw. I have it set on the 0.8 opening, stuffed a 3mm coil in it and still had to cover one of the airflow openings at the bottom with a piece of tape to even start to get close to an MTL draw. Gonna have to call BS on this review.
Nice review Mike!
Concerning the airflow I believe Matt said he himself notices the difference pretty good and he's going to see if it's an issue with the batch that was send out.
Nonetheless, great review and indeed a sexy looking rta
I just got one and I don't agree that the chimney can be taken apart for cleaning. I tried and it was so tightly screwed down that it wouldn't budge either direction and it started to strip that screw nut thingy and it started making plastic sounds that made me think that it was about to break. Not a single review I've seen on this had it broken down. It's it reverse or standard threaded?
Too bad this won't work for direct lung. Looks awesome
Thanks for the great review Mike!
Yep the only two points that l don’t like about this rta is one , the 5 airflow options are barely noticeable and two , the plastic tank . The airflow options being pretty minimal ain’t a biggie for me but l really hate plastic tanks . Will hold off for a while and see how others get on with the plastic tank to see if it crazes or cracks . I use fruit vapes so the acidity may damage it . Great review and a nice change for a mtl with at least a different take on the airflow .
Mike: I did manage to fit a 24ga, 3mm coil in. But it was very tight. I agree with you about the air flow adjustability. I'm looking for a single 18650 mod with type C charge for it. Do you have a favorite? Stay healthy and happy.
Thanks Mike
Thanks for the review Mike!
Yep, i agree. Before anyone publicly said anything i noticed it myself here at home like right away. It vapes great. Just they kinda missed the mark naming it cog and the whole point is different af by spinning it. But its seriously a great mtl vape and cheap so i like to look for silver linings and its good. I personally notice like 3 different changes but they're so similar its hard to say. It's basically 1 af. Def has me lookin for the Ares V2 tho i like to adjust my mtl. Thanks Mike!
I can imagine the smile on your face when you do the underneath action
PCTG was developed to stop the leaching of Bisphenol A into whatever liquid it contains. It is more expensive and considered food safe. You made want to do a rethink on poly-carbonate (PC) tanks.
We try it in jordan bro and its a bad rta ?
I really like it but wish it had a bit more airflow maybe a 1.8 hole or even 2 mm
This is by far one of the best mtl rta's that has released in a while. I havent put mine down since getting it. I've been using it over my kayfun lite, If anyone wants a great mtl rta this is it
Matt been making some nice vape gear just like you Mike all it comes down to is great minds put together the best vape products ????
How is it for throat hit?
Great review mike would rather have the intake dual yeah buddy
not a proper MTL ?
Mr. Todd needs to review this
I'm here for the underneath action
Good flavour, looks great, but is a little too airy for me. It has still made my rotation for the above reasons, but I expected a "proper" MTL as Mark Todd would say. Nice one though Mike!
Tickle tickle! Great looking mtl rta.
That's y u can't feel the airflow difference coz it's only a .2 difference from setting to setting. But trust me an experienced mtl vaper can tell them apart