This iJust One would be a great pocket device. My first sub-ohm device was an iJust2 with the .5 ohm coils. That one helped me get off of cigs. It was much more satisfying than the Ego pen style units I started with. My old iJust2 still works, and I take it out for a spin now and then.
Hello Mike, I have an Eleaf IJust S but I cannot use it because the vapor is terribly hot. Mine has an airflow control ring but, no matter how I regulate it, the vapor is always too hot. Do you have any advice on how to overcome this problem? Thank you, Elio
The ijust 2 was amazing just my battery button broke really fast. But watching this video literally made me go on ebay and buy a new one. The ijust2 is so slick, reminds me of a mech mod with the simplicity, but is super safe. My Moonshot worked perfectly on it with a .3 dual coil build. I wish I could find just the ijust2 batteries only for less than the whole $22 kit, since I don't want the tanks. If I could find the batteries for like $16 I'd buy 2-3. I had the original Ijust that went from 3.7-5 volts like 5 years ago, I used it into the ground.
Hey people. Anyone got any tips for getting the plastic tank it comes with. No finding it easy to remove to replace the coil and fit the glass tank. I feel like if i squeeze it to hard its going to break. Any tips are very welcome and greatly appreciated.
Which came from me without pre instaled coil 0.3 ohm And I wanted to let go of the glass, but I'll get rid of it with nothing !!! And it has to be done because there is no liquids left out of the stick How do I dispose of the glass? to spin ? Or clicks? I can not use it anymore, it's coughed because everything is full of liquids Can you help me get rid of the glass I'm going to put the new glass and the new coil Normally, coil 0.3 is set, so I do not see with me. And the coil gs air 0.75 ohm what should I do? That pull it open and slide into the 0.3 ohm sleeve? Now I can not smoke is sad
The glass must be done with me all the kit is leaking liquid And that glass will not work out like you show on your video But good i will never buy abroad Never get your answer !!!!!! Just make order and keep making orders Being sick do not hurt they say hell hell
A little secret that fixed my leaking problem with iJust S, screw your coil into the base, then knock out the silicon piece in the stack and push it into the top of your coil then slide the stack(tank) over your coil while screwing your tank onto the base. I know it sounds like BS but it fixed my leaks. I guess just screwing the tank onto the base isn't allowing the silicon seal not to line up with top opening of your coil causing it to flood and leak out the vent slots in the bottom. Try that and let me know. I'm a machinist and I'm thinking my next option would be to machine a stainless plug with smaller hole sizes than the one it current uses but this trick is working fine. And another problem I discovered, the coils with the round center pins with the 4 holes weren't making contact with the center pin on my base, but the coils with the flat sided worked fine. So i'm having to pull the center pin out using the center pin with the flat sides, The must be a few thousandths difference in the length. Anyway lemme know if this helps your leaking problem.
Looks like the Smok 22
any spit backs mike?
My first vape was an I just device and it saved my life.
nice
Love this little kit great review Mike
This iJust One would be a great pocket device.
My first sub-ohm device was an iJust2 with the .5 ohm coils. That one
helped me get off of cigs.
It was much more satisfying than the Ego pen style units I started with.
My old iJust2 still works, and I take it out for a spin now and then.
all these companies doin this 2ml shit on EVERYTING now bc of Europe and TPD…I Mean….what about USA??? That's not our regulation(s)
Hello Mike, I have an Eleaf IJust S but I cannot use it because the vapor is terribly hot. Mine has an airflow control ring but, no matter how I regulate it, the vapor is always too hot. Do you have any advice on how to overcome this problem?
Thank you, Elio
The ijust 2 was amazing just my battery button broke really fast. But watching this video literally made me go on ebay and buy a new one. The ijust2 is so slick, reminds me of a mech mod with the simplicity, but is super safe. My Moonshot worked perfectly on it with a .3 dual coil build. I wish I could find just the ijust2 batteries only for less than the whole $22 kit, since I don't want the tanks. If I could find the batteries for like $16 I'd buy 2-3. I had the original Ijust that went from 3.7-5 volts like 5 years ago, I used it into the ground.
how's the flavour, Mike ?
Hmm… but… iJust 2 sometimes leak, and if it happens in this one it's going to leak straight into the electronics and the battery…
Ijust one or ego aio?
Is ijust 2 bettery suitable for petri RDA?
How did you open the glass?my glass was so tight as hell
Hey people. Anyone got any tips for getting the plastic tank it comes with. No finding it easy to remove to replace the coil and fit the glass tank. I feel like if i squeeze it to hard its going to break. Any tips are very welcome and greatly appreciated.
Thanks Mike! One quick question before purchase this for my gf, can I use Atlantis coils with this baby?:)
gonna connect my little 10 000 mAh power bank to it and I'm ready to go to school
plz tell me which has better,thick,more clouds. (vape pen 22, eleaf I just one, joytech ego one vt, or something like in this budget)
Mine is leaking like hell
Which came from me without pre instaled coil 0.3 ohm
And I wanted to let go of the glass, but I'll get rid of it with nothing !!!
And it has to be done because there is no liquids left out of the stick
How do I dispose of the glass? to spin ? Or clicks?
I can not use it anymore, it's coughed because everything is full of liquids
Can you help me get rid of the glass I'm going to put the new glass and the new coil
Normally, coil 0.3 is set, so I do not see with me.
And the coil gs air 0.75 ohm what should I do? That pull it open and slide into the 0.3 ohm sleeve?
Now I can not smoke is sad
The glass must be done with me all the kit is leaking liquid
And that glass will not work out like you show on your video
But good i will never buy abroad
Never get your answer !!!!!! Just make order and keep making orders
Being sick do not hurt they say hell hell
coil 0,18 are possible??
Great device for $18-$22. I picked one of these up after my Sigelei Fuchai started firing on it's own. Very happy with it as a temporary vape.
yeah "just slide the glass right off"… fukkn midget stubbernd shitstick this…
A little secret that fixed my leaking problem with iJust S, screw your coil into the base, then knock out the silicon piece in the stack and push it into the top of your coil then slide the stack(tank) over your coil while screwing your tank onto the base. I know it sounds like BS but it fixed my leaks. I guess just screwing the tank onto the base isn't allowing the silicon seal not to line up with top opening of your coil causing it to flood and leak out the vent slots in the bottom. Try that and let me know. I'm a machinist and I'm thinking my next option would be to machine a stainless plug with smaller hole sizes than the one it current uses but this trick is working fine. And another problem I discovered, the coils with the round center pins with the 4 holes weren't making contact with the center pin on my base, but the coils with the flat sided worked fine. So i'm having to pull the center pin out using the center pin with the flat sides, The must be a few thousandths difference in the length. Anyway lemme know if this helps your leaking problem.