I just set mine up and when I tried to hit it, I got the juice in my mouth? Why is that happening and how do I make it so I dont get the juice to come up through the mouth piece?
Why aren't any of these set up videos showing how to properly align the coil?!?!?!!!!! With the 1.o which is the green band best for salt nic. After you screw on your chimney, screw the coil in so that the small dotted holes are seen on both sides when you look threw your tank. Also at the top of your coil their is a half circle you can align with the oval part of the inside of your tank. Now you won't have spit back or gurgle and hot fucking vape juice in your mouth. Hate videos like this, they tell you the most basic things anybody can figure out but don't tell you the shit ppl really need to know like I just did bout the coils. Hope this helps and you can avoid the frustration ?
I contacted Aspire support, and they say; "You don't need prime the coil, after filling the pod, please let the pod stand for at least 5 minutes to let the e-juice flow into the coil."
Love your videos Dave! I've since ordered from DashVapes. I use a Breeze2 and took advantage of your "start" promo. Awesome and thank you!
Oh, and it's been a couple weeks without a cigarette! Maybe I can really quit this time. 🙂
Anyone having a problem with BREEZE 2 here is the solution it will take you 30 seconds-1minute to solve: You need the two small holes in the coil to be visible from each side of the pod and your airflow be adjacent to small holes in the drip tip(mouthpiece) 1. When screwing in the coil to the airflow make sure the airflow slot on the coil is perfectly aligned with the airflow on fully open. Normally, aspire text on the coil should be just a bit over the beginning of airflow when screwed in 2. When you screw the airflow and coil into the pod, screw it in tight so the fully opened airflow is facing the small holes in the mouthpiece VAPE upboat so more people can see
Do you really need to prefill your coil? Can't you just put it in the tank and let it sit for a few minutes after filling the tank? No need to rush, right?
I'm loving the Aspire Breeze 2! Who's gonna pick one up?!
How often should I change the coil…or is it not meant to be changed?
I’m going to get one of these with that promotion. ??
It won't let me screw in my chimney after I put my coil on, help please? @DashVapes
I just set mine up and when I tried to hit it, I got the juice in my mouth? Why is that happening and how do I make it so I dont get the juice to come up through the mouth piece?
Are nicotine salts supposed to be used on the 0.6 ohm coil?
Dave I followed you and my 2 Aspire Breeze 2's wouldn't work. Well I realized I didn't turn it on .
I’m getting the aspire breeze 2 soon but idk how much nic is good. I’m fairly new at vaping so I need some suggestions
How do I get the free device please
How can you tell when the coils are bad I'm new to this lol
Why aren't any of these set up videos showing how to properly align the coil?!?!?!!!!! With the 1.o which is the green band best for salt nic. After you screw on your chimney, screw the coil in so that the small dotted holes are seen on both sides when you look threw your tank. Also at the top of your coil their is a half circle you can align with the oval part of the inside of your tank. Now you won't have spit back or gurgle and hot fucking vape juice in your mouth. Hate videos like this, they tell you the most basic things anybody can figure out but don't tell you the shit ppl really need to know like I just did bout the coils. Hope this helps and you can avoid the frustration ?
I did follows all the steps but I can't get hit
Disappointed with this. I'm new to vaping and order DV promotion. My breeze 2 coil is flooded (I suppose) and have no clue how to fix it.
Subscribed. New to POD system vapes and seeing exactly how to set them up helps massively. Thanks for the VID. Cheers
I contacted Aspire support, and they say;
"You don't need prime the coil, after filling the pod, please let the pod stand for at least 5 minutes to let the e-juice flow into the coil."
Love your videos Dave! I've since ordered from DashVapes. I use a Breeze2 and took advantage of your "start" promo. Awesome and thank you!
Oh, and it's been a couple weeks without a cigarette! Maybe I can really quit this time. 🙂
I want a starting vape & I like the looks of this one, should I buy it?
How long does the juice “essentially” last
Bad device… Too much juice coming while paving… Tried both coils with saltnic and freebase but the same problem… Not recommended
Thank you bro…. about 5 hitting for turning on
Just got mine today! Waiting the 5m right now. =) Excited to try it out, thanks for the instruct vid to set it up!
love how you edited out how hard it was to take off mouth piece
Anyone having a problem with BREEZE 2 here is the solution it will take you 30 seconds-1minute to solve:
You need the two small holes in the coil to be visible from each side of the pod and your airflow be adjacent to small holes in the drip tip(mouthpiece)
1. When screwing in the coil to the airflow make sure the airflow slot on the coil is perfectly aligned with the airflow on fully open. Normally, aspire text on the coil should be just a bit over the beginning of airflow when screwed in
2. When you screw the airflow and coil into the pod, screw it in tight so the fully opened airflow is facing the small holes in the mouthpiece
VAPE
upboat so more people can see
Do you really need to prefill your coil? Can't you just put it in the tank and let it sit for a few minutes after filling the tank? No need to rush, right?
What’s the best coil to use of the few that they offer?
When putting in a new coil do you need to empty all the juice out of the pod?