if you dont want to bother with all of the trial and error to get this thing to work, wait for the LIT RDA coming out april 2018 its a mesh dual coil rda and the cotton DOES NOT COVER THE FREAKING SQUONK HOLE, sucking your juice back down in the bottle.
Mike, I'm not sure how to contact you directly but, I hope you see this. I have a question on mesh sizes. I see different mesh ratings (openings per inch) like 200, 300, 400, etc. In your opinion, what is the best mesh for cotton wicks?
Anyone ever notice that blue variants of vape mods are ALWAYS sold out? Like, blue is my favorite color, but blue is ALWAYS sold out, no matter what atomizer it is, or what website, it's like it never actually existed.
This is the 3rd review I've watched on this rda, why don't any of them say that after 4 or 5 vapes, it get's so hot you can't touch it? Not very honest reviews!! I've used mesh, double and single coil builds, and it doesn't matter, after 4 or 5 vapes the whole rda gets very hot.
DO NOT BUY!!!! there is not enough build room for the size of the mesh coil as the deck is under 30mm combined with no juice well, when built right the only flavour you get is from a mouthful of eliquid from excessive splash. It also doesn't help that the coil is sitting right on the deck in the juice. Don't let it rest in your centre console of your car and bounce around as this will cause hot spots in the mesh and you'll be screwed at work vaping metal. Air flow is great and easy to build on. I vaped on mine for a month and absolutely hated it. The 510 drip tip adapter is to big for 510 drip tips.
Respect to you. you seem to know far more than light designs he doesn't have a clue I maid no references to vandy vapes abilities in making me really clever build deck I'm just getting started on me own builds this is a good confidence builder for me but he tried to put me off it thankfully it didn't work as I have one III you could do both on this one little Deck is great probably better at the mesh builds than coils if there is any tips you can think of that might help would be much appreciated keep it up you rock
I've been vaping mine in wattage mode (0.33 Ohms @ 60 watts) for weeks, and had no problem (very few dry hits). Your video inspired me to try temp control today, and I managed to dial it in right away. (0.33 Ohms @ 63 watts and 475°F) Seems nearly perfect…and no dry hits! Thanks.
if you dont want to bother with all of the trial and error to get this thing to work, wait for the LIT RDA coming out april 2018 its a mesh dual coil rda and the cotton DOES NOT COVER THE FREAKING SQUONK HOLE, sucking your juice back down in the bottle.
Mike, I'm not sure how to contact you directly but, I hope you see this. I have a question on mesh sizes. I see different mesh ratings (openings per inch) like 200, 300, 400, etc. In your opinion, what is the best mesh for cotton wicks?
First rda and it is amazing
Anyone ever notice that blue variants of vape mods are ALWAYS sold out? Like, blue is my favorite color, but blue is ALWAYS sold out, no matter what atomizer it is, or what website, it's like it never actually existed.
I can't take mine apart. I think they welded it together. What the actual fuck is wrong with companies making it difficult.
I had to shorten the wire, the mesh burned the plastic drip tip – didnt realise till it was a bit late either….
My mesh keeps spotting, cant keep an even glow… 1st build it was focused on the side of the mesh and the 2nd time it focused heat on the posts…
Ni80 flavours not brill but ok. Mesh is great on gbox squonk
This is the 3rd review I've watched on this rda, why don't any of them say that after 4 or 5 vapes, it get's so hot you can't touch it? Not very honest reviews!! I've used mesh, double and single coil builds, and it doesn't matter, after 4 or 5 vapes the whole rda gets very hot.
DO NOT BUY!!!! there is not enough build room for the size of the mesh coil as the deck is under 30mm combined with no juice well, when built right the only flavour you get is from a mouthful of eliquid from excessive splash. It also doesn't help that the coil is sitting right on the deck in the juice. Don't let it rest in your centre console of your car and bounce around as this will cause hot spots in the mesh and you'll be screwed at work vaping metal. Air flow is great and easy to build on. I vaped on mine for a month and absolutely hated it. The 510 drip tip adapter is to big for 510 drip tips.
Respect to you. you seem to know far more than light designs he doesn't have a clue I maid no references to vandy vapes abilities in making me really clever build deck I'm just getting started on me own builds this is a good confidence builder for me but he tried to put me off it thankfully it didn't work as I have one III you could do both on this one little Deck is great probably better at the mesh builds than coils if there is any tips you can think of that might help would be much appreciated keep it up you rock
Juice well aint a problem bcuz of bf
And i gonna buy this for secret weed burner how should i build
I've been vaping mine in wattage mode (0.33 Ohms @ 60 watts) for weeks, and had no problem (very few dry hits).
Your video inspired me to try temp control today, and I managed to dial it in right away. (0.33 Ohms @ 63 watts and 475°F)
Seems nearly perfect…and no dry hits!
Thanks.
Can Liquid run out of the tank?
Vapor trail 29.99
The only thing I hate about this RDA, is the lack of a deep juice well
What MOD are you using
Good product outstanding almost as good as the wotofo profile mesh. Will try it .vandy vape pulse and dual are great devices used with mesh..
So could wick this on the profile the same
Hey, just a random query from a beginner. Would the Wotofo Profile meshes be compatible with the Vandy mesh rda?
Hi
anyone mesh rta completely stuck to the point where it’s unopenable
Hi Mike, I've been trying it for a day, the hot liquid spraying into my mouth, do you or anyone here knows how to handle this Hot-spraying-situation?
Tq
Can you vape this in temp with the other two types of mesh?
You reminds me of tom sizemore