Absolutely loved my original Rx200. Never had a problem with my 510 but i always used rdas with it that didnt have very long 510s …Then… i dropped it.. from 4 feet high,.. trying to vape and carry groceries.. lol… bent the shit outta the top and bottom so they were kinda bent away from eachother…. Bent the pieces back down, made sure my batteries werent damaged, put the door back and it still workd Great!.. no scrathes on the paint either.. Then.. i dropped it again from about 3 feet trying to put it in my pocket… this time Breaking the top screw mount for the battery sled in half…Broke my Hatty Rda 🙁 and bent the shit outta the top portion of the mod..again.. bent it back,, glued the sled together, STILL FRIGGIN WORKED, i could not believe it.. and still NO SCRATCHES… then… dropped it a THIRD TIME.. this time, getting out my car.. fell onto the pavement into the worlds biggest pile of tiny pebbles.. scratched the shit outta the top, and REALLY BENT IT… Didnt hurt the Velocity tho, besides the smallest nick in the chuff.. but the battery terminals dented my 3 LG chocs… so.. i Bent it back.. but this time, i took it apart to make sure the chip didnt crack or anything, and sure enough IT DIDNT.. so i put it back together threw 3 sonys in.. and holy friggen shit, it STILL WORKS.. lol however after this many falls and bend backs, im putting her on the shelf.. just in case something is wrong with the board.. really dont want 3 batteries venting in my face lol. But i'm ordering a new Rx200s. I just loved this mod and i miss it… Hits like a tank and Built Like One Too. Cant go wrong with this thing.
i never had any of the wismec devices but i have the rx300 on the way should i get the rx200s two for the chip and different size or its really not a big difference in either keep the videos coming thanks in advance
i don't understand this, I just bought everything new, the tank (wismec reux), the batteries (25 amps, 2500 mAH), and the mod itself and put it all together today and yesterday.
I charged it up to full, primed the wick and filled it up, then let it sit for 5-10 minutes. Despite these measures, every time I hit it, it seems to drains 1-2% battery life (that or it's reading wrong, because it says it's at a lower% one moment, and then bumps up to a higher% the next for no apparent reason).
Not only that, but the coil is already tasting burnt (keep in mind, it's a brand new coil). I've hit it maybe 25-35 times at most, vaping usually around 60-75 watts, and 100 watts maybe 3 or 4 times. As I said previously, I did prime it and I let it sit for 5-10 minutes after filling, so it makes no sense that it's already burnt. Originally, I filled it up with a different juice but it was too harsh, at 18MG nicotine, so I washed the coil in warm water and dried it out just a tad with a hair dryer, then primed, filled and sat it with a new 6MG nicotine juice. This may be the source of the problem, but I' don't think that's enough to cause such serious problems.
It's also already at half a tank from being near full. I'm using the triple prebuilt coil head, and a 65-35 PG/VG juice.
The device also gets pretty hot, and the tank almost burns to the touch after only 5-10 hits, even whilst vaping at 70-75 watts. the coil i'm using says it vapes anywhere from 60-160 watts though, so…
the tank is also leaking out of the airflow holes, but that doesn't have anything to do with the mod itself.
what exactly is going on here? i don't know if these are problems with the tank mostly, or the mod or the batteries, but it's pretty fucked up. Most of them seem like problems with the tank, but not all of them. I'll post this same comment on a video about the tank itself, if you have one.
i'm in love with the RX200s for me is the best mod especially on the looking very beautiful and because i was to impatient to wait 3 weeks i bought the shitty smok h-priv how much i have regard this you can't imagine. :/ Some day i will buy it and i make it even more beatifull with carbon fiber and a new big gold 510 connector..
Your weak,screw harder lol.??.mines great,I have 30 authentic attys and they all fit.yours gaps,yours my friend.✊?
Absolutely loved my original Rx200. Never had a problem with my 510 but i always used rdas with it that didnt have very long 510s …Then… i dropped it.. from 4 feet high,.. trying to vape and carry groceries.. lol… bent the shit outta the top and bottom so they were kinda bent away from eachother…. Bent the pieces back down, made sure my batteries werent damaged, put the door back and it still workd Great!.. no scrathes on the paint either.. Then.. i dropped it again from about 3 feet trying to put it in my pocket… this time Breaking the top screw mount for the battery sled in half…Broke my Hatty Rda 🙁 and bent the shit outta the top portion of the mod..again.. bent it back,, glued the sled together, STILL FRIGGIN WORKED, i could not believe it.. and still NO SCRATCHES… then… dropped it a THIRD TIME.. this time, getting out my car.. fell onto the pavement into the worlds biggest pile of tiny pebbles.. scratched the shit outta the top, and REALLY BENT IT… Didnt hurt the Velocity tho, besides the smallest nick in the chuff.. but the battery terminals dented my 3 LG chocs… so.. i Bent it back.. but this time, i took it apart to make sure the chip didnt crack or anything, and sure enough IT DIDNT.. so i put it back together threw 3 sonys in.. and holy friggen shit, it STILL WORKS.. lol however after this many falls and bend backs, im putting her on the shelf.. just in case something is wrong with the board.. really dont want 3 batteries venting in my face lol. But i'm ordering a new Rx200s. I just loved this mod and i miss it… Hits like a tank and Built Like One Too. Cant go wrong with this thing.
Sorry bout the Rant Mike lol
I prefer the gaps. Tanks Won't scratch the mod
i never had any of the wismec devices but i have the rx300 on the way should i get the rx200s two for the chip and different size or its really not a big difference in either keep the videos coming thanks in advance
mike what about tha 510 pin you got me ? cause this is my go to daily quick draw mcgraw mod lol ?????
30mm calypso fits perfect no gap zone mike
????
my tsunami 24 sits flush on my 200s incase anyone is worried about 510 still
i don't understand this, I just bought everything new, the tank (wismec reux), the batteries (25 amps, 2500 mAH), and the mod itself and put it all together today and yesterday.
I charged it up to full, primed the wick and filled it up, then let it sit for 5-10 minutes. Despite these measures, every time I hit it, it seems to drains 1-2% battery life (that or it's reading wrong, because it says it's at a lower% one moment, and then bumps up to a higher% the next for no apparent reason).
Not only that, but the coil is already tasting burnt (keep in mind, it's a brand new coil). I've hit it maybe 25-35 times at most, vaping usually around 60-75 watts, and 100 watts maybe 3 or 4 times. As I said previously, I did prime it and I let it sit for 5-10 minutes after filling, so it makes no sense that it's already burnt. Originally, I filled it up with a different juice but it was too harsh, at 18MG nicotine, so I washed the coil in warm water and dried it out just a tad with a hair dryer, then primed, filled and sat it with a new 6MG nicotine juice. This may be the source of the problem, but I' don't think that's enough to cause such serious problems.
It's also already at half a tank from being near full. I'm using the triple prebuilt coil head, and a 65-35 PG/VG juice.
The device also gets pretty hot, and the tank almost burns to the touch after only 5-10 hits, even whilst vaping at 70-75 watts. the coil i'm using says it vapes anywhere from 60-160 watts though, so…
the tank is also leaking out of the airflow holes, but that doesn't have anything to do with the mod itself.
what exactly is going on here? i don't know if these are problems with the tank mostly, or the mod or the batteries, but it's pretty fucked up. Most of them seem like problems with the tank, but not all of them. I'll post this same comment on a video about the tank itself, if you have one.
would the Kennedy 22 fit flush on this device
How do u change the ohms on the device, I'm running a coil with .15 ohms plz help
i'm in love with the RX200s for me is the best mod especially on the looking very beautiful and because i was to impatient to wait 3 weeks i bought the shitty smok h-priv how much i have regard this you can't imagine. :/
Some day i will buy it and i make it even more beatifull with carbon fiber and a new big gold 510 connector..
Hey mike does this device offer preheat functions ? Thanks for your time !
my Apocalypse RDA sits flush
anyone can tell me what mod and atomizer to get? I'm new in vaping. Your answers will be very much appreciated.
Hi mike funnily enough my tsunami does not gap
Nice wrap !
I like to have a small gap then the top doesn't get scratched from the tank
I just got a red and black one looks great
Looks like my first cell phone
Beware the rx200s they burn up and auto fire . Its a flaw the company will not stand by also .
Does a sense blazer pro have any over hang on this mod? Please respond
Please someone answer this!!
Just got this, but what tank should I buy? – Not tooo expensive.
i know the reason why they have gaps on th 510 area is to prevent the mod from scrathing from twisting an atomizer
How do u change watts only, not voltage
1/10/2019
Version 4.13 upgrade is a big improvement. It adds PRE-HEAT features to fast ramp-up upon firing. Go here :
http://www.wismec.com/software/wismec-tc-software-for-upgrading-reuleaux-rx200s/