Oh yea and “positive up” should be because if you do have a tear in your battery wrap, it will complete the circuit to the negative part of the battery (under the wrap). This means your volts would still have to push through the coil which would be within the resistance/current rating of the battery. Versus completing the circuit through the button directly back into the nick in the wrap. Would give you enough time to disconnect the circuit safely when positive is at the top
Hi) I'd like to add 2 more cons for it. 1-st – no constant contact in 2023… Well, it is not a big deal, but u need to clean your contact and battery contact from black dots that appears during using it. If you are new to mechs, keep it in mind, cause if u don't do it you'll spoil contact and battery. Second – cooper. Yes, it heats as hellfire, but it is covering with oxidation and u need to clean it once in several days (if u live near salt water (see or ocean), u need to clean 2-3 times a week). It would be better if Rick had covered it with silver. Yes, silvering will be removed with polishing, but you always may bring to the jeweler and renew it. Did it with my Manhaten V3 and I am happy. Never the less, great device! Thanks 4 review, Mike
Looks like a nice mech. Can't complain about new mechs being made. Only thing is it almost looks like a vindicator or at least definitely inspired by it.
VCIGO MOON BOX
Great to watch a mech review. YouTube is saturated of pods and disposables, but it's what people demand. Anyway great review
Thanks Mike! xo
As Mike said: before using a mechanical mod learn ohm's law and know the limit of your batteries. Always test a new build with the top cap on using a regulated mod.
Calculate coil resistance and ohms law https://www.steam-engine.org/coil
Mooch's Recommended Batteries https://www.e-cigarette-forum.com/blog/moochs-recommended-batteries.7593/
Cam I use tanks atomizers in mechs?
Will always blow my budget on mechs 😍
Oh yea and “positive up” should be because if you do have a tear in your battery wrap, it will complete the circuit to the negative part of the battery (under the wrap). This means your volts would still have to push through the coil which would be within the resistance/current rating of the battery. Versus completing the circuit through the button directly back into the nick in the wrap. Would give you enough time to disconnect the circuit safely when positive is at the top
Great review Mike
What? No Magnet switch?
Definitely still use mech’s when at home. By far still my favorite
Thanx Mike and futube 😊😊
Welcher Mann will schon etwas in den Mund nehmen das aussieht wie ein Penis 😅
Awesome review! I just got the new Deathwish mod Cthylla & it’s amazing
#mechsforlife
Bravo mec mod men fuk dispo men
It has been a while… Sick and tired of pods
Great review mike
Mechs only my man!!!!
Hi) I'd like to add 2 more cons for it. 1-st – no constant contact in 2023… Well, it is not a big deal, but u need to clean your contact and battery contact from black dots that appears during using it. If you are new to mechs, keep it in mind, cause if u don't do it you'll spoil contact and battery. Second – cooper. Yes, it heats as hellfire, but it is covering with oxidation and u need to clean it once in several days (if u live near salt water (see or ocean), u need to clean 2-3 times a week). It would be better if Rick had covered it with silver. Yes, silvering will be removed with polishing, but you always may bring to the jeweler and renew it. Did it with my Manhaten V3 and I am happy. Never the less, great device! Thanks 4 review, Mike
😤💨
Is there holes in the 510 connector to get stuck attys off, or is it dull enough that ya can grab the 510 plate to unscrew an atty?
Looks like a nice mech. Can't complain about new mechs being made. Only thing is it almost looks like a vindicator or at least definitely inspired by it.
Vapor since ‘14 mechs are my main mod.
Still mechanical user 🙌🏽💨💨
Still love my vindicator