i just bought this, but this is my first time trying e-cigerattes in general i didn't even know i needed to buy a atomizer for it (trying to stop smoking). Can anyone recommend me what wattage i should use? I have a 1.2ohm coil with a Eleaf GS Air 2 clearomizer, can anyone recommend be the best setup for this? Again i'm a real noob i have no idea what i'm doing, I just bought these on a whim after googling a little.
Mike I need you to answer me an honest answer I want to ask if the 100w tc is good for me now ? like others been saying that they don't trust eleaf because of the quality on the mod I want to ask if the quality on the 100w tc is amazing ?? can u get back to me ASAP
has yours fallen apart yet? had mine a few months and the magnets have already popped out twice. to the point one battery door won't stay on. need to re glue.. also having problems with firing. squeeze and nothing happens 50% of the time. also the paint on the black model has already begun to chip around all the edges. if I take my finger nail to it it comes right off. it's a real let down. mind you its cheap but I'd spend your money on something with better build quality. I regret buying this. I loved it until this week. magnets should not be falling out of a mod that's less than 100 days of use. another issue is the doors don't protect the interior. juice leaks thru the doors with ease so you gotta wipe inside and out if your dripping on it.
On bypass does it work like any normal unregulated till 0.1 ohms? I mean it gives you more than 100 watts depending on how charged your battery is right?
Hey Mike I'm just starting with ss316l on my I stick and was wondering is it safe or OK to run SS316L in SS mode on the istick 100tc or should I be in TCR mode set at .0092 …tried them both and prefer using it in SS mode on the istick but just not sure if it's ok/safe?
mike just had a reg 100w die on me and now Im consideringg the tc version can you show or tell which coils you can use with the temp controll settings so ill know if my tanks will work or tell me what need to get currently have cerakote by horizontech
Hey Mike Would you recommend this vs the joyetech evic Primo? Is there any other dual 18650 you would prefer? I'm between these two or for even cheaper I might even end up ordering the Pico. I don't really care about high wattage, well if I have it I might use it, but I'm mostly MTL and flavor is my thing. I have the Atlantis (no crazy about it so far) and the GS Tank …. Thanx
I just got that Mod 10 days ago for 16$ (well, 21$ with the Eleaf Lemo2 included) and I really like it. It's my first proper Mod. It's a real one that I updated with 1.13 with no issues. I must say the doors are moving on mine ; they "click" when I touch them or hold the device, they move slightly from side to side aswell as up and down. They pushed it to 120w and added "Smart Mode" (which doesn't really work) and "Preheat", which is really nice ! (got it at 40w for 0.5s which then back down to 33w) It lasts me about 2 days with a pair of Samsung 25R. Already clocked 9200 seconds of vaping on it with 3200 puffs … Recieving my Geekvape Zeus Dual this week ; it's gonna hang off on every sides above that 23mm Mod xD
i just bought this, but this is my first time trying e-cigerattes in general i didn't even know i needed to buy a atomizer for it (trying to stop smoking). Can anyone recommend me what wattage i should use? I have a 1.2ohm coil with a Eleaf GS Air 2 clearomizer, can anyone recommend be the best setup for this? Again i'm a real noob i have no idea what i'm doing, I just bought these on a whim after googling a little.
Mike I need to buy some black tape from you lol. The doors is wobbly more so the one that doesn't have the lock on that side.
Ευχαριστούμε Κώστα, όμορφο το Mod !
Mike I need you to answer me an honest answer I want to ask if the 100w tc is good for me now ? like others been saying that they don't trust eleaf because of the quality on the mod I want to ask if the quality on the 100w tc is amazing ?? can u get back to me ASAP
has yours fallen apart yet? had mine a few months and the magnets have already popped out twice. to the point one battery door won't stay on. need to re glue.. also having problems with firing. squeeze and nothing happens 50% of the time. also the paint on the black model has already begun to chip around all the edges. if I take my finger nail to it it comes right off. it's a real let down. mind you its cheap but I'd spend your money on something with better build quality. I regret buying this. I loved it until this week. magnets should not be falling out of a mod that's less than 100 days of use. another issue is the doors don't protect the interior. juice leaks thru the doors with ease so you gotta wipe inside and out if your dripping on it.
On bypass does it work like any normal unregulated till 0.1 ohms? I mean it gives you more than 100 watts depending on how charged your battery is right?
Hey Mike I'm just starting with ss316l on my I stick and was wondering is it safe or OK to run SS316L in SS mode on the istick 100tc or should I be in TCR mode set at .0092 …tried them both and prefer using it in SS mode on the istick but just not sure if it's ok/safe?
Mike! What RDA did you have on the istick in this video? You didnt put a link in the description and i quite like the RDA…please help! Thanks!!
hey great video! is eleaf its own company or does joyetech own it ? +Mike Vapes
I heard after awhile the paint scratch sand chips bad. But that might have been on the one before this, can anyone confirm that?
I have a question, why my device change SS mode to VW mode autmaticly? i have geekvape SS fused clapton 26GA*2+30GA clapton coil.
hey mike, just ordered this online, any suggestions on tank to use? aspire?, griffin? …
mike just had a reg 100w die on me and now Im consideringg the tc version can you show or tell which coils you can use with the temp controll settings so ill know if my tanks will work or tell me what need to get currently have cerakote by horizontech
should I get this or the innokin coolfire 4 ???
mine tends to slip out of temp control. how to fix this? im using 316 SS wire.
$9.99 @vapordna now on the link you provided. Coupon: deals10 for 10% off that.
what batteries can I use for this exactly
mike plz answer
i want to know what tank you are using in the video
because it comes without tank right?
what should i use for it?
Just bought for 28.39 $
http://www.gearbest.com/temperature-control-mods/pp_311099.html?wid=21&lkid=10350988
I hope this may help you
Hey Mike
Would you recommend this vs the joyetech evic Primo? Is there any other dual 18650 you would prefer? I'm between these two or for even cheaper I might even end up ordering the Pico. I don't really care about high wattage, well if I have it I might use it, but I'm mostly MTL and flavor is my thing. I have the Atlantis (no crazy about it so far) and the GS Tank …. Thanx
does it come with the batteres ?
I have this mod with firmware 1.13 and it rocks. I recommend to pro and newbie vapers alike.
Just picked it up for 12.90…I never get the latest and greatest, but i love the clearance sections!
I just got that Mod 10 days ago for 16$ (well, 21$ with the Eleaf Lemo2 included) and I really like it.
It's my first proper Mod. It's a real one that I updated with 1.13 with no issues.
I must say the doors are moving on mine ; they "click" when I touch them or hold the device, they move slightly from side to side aswell as up and down.
They pushed it to 120w and added "Smart Mode" (which doesn't really work) and "Preheat", which is really nice ! (got it at 40w for 0.5s which then back down to 33w)
It lasts me about 2 days with a pair of Samsung 25R.
Already clocked 9200 seconds of vaping on it with 3200 puffs …
Recieving my Geekvape Zeus Dual this week ; it's gonna hang off on every sides above that 23mm Mod xD
Nice review, as always.
Still use my one now the paint has held up amazing a couple of tiny little chips in it I wish some other companies will take a leaf out of their book