I might be the only person on the planet to have hated the original profile. I hated it with a passion. Couldn't get it to wick right no matter what i did. After about 2 weeks, i ended up throwing both my profile rdas across the street. I'm going to give the 1.5 a try.
Great review, but I'll be sticking with my original profile. The new one will use more cotton and therefore more juice. I have never found I needed more than 50watts. Please review the Topside Lite though! I'm desperate to know how much it weighs compared to the original paperweight
Thank you Mike for a great Review. Once the clone is out on the market, I will try with 316 500 mesh and TC on my Luxotic DF with Arctic Fox FW 😉 @Wotofo I will wait until the clone of this is out. You still put the Coily clone in your products, I buy only clones of your products until you stop using the Coily clone!
wotofo completely fucked thousands of customers.. It was to be shipped from USA california nov 25 th… Everyone that bought the profile 1.5 shows it was shipped by wotofo from california (fremont) on nov 27 th…. most of us including me paid for priority USPS shipping <<<<< It shows via tracking handed over to a 'SHIPPING PARTNER (NEWGISTICS) THAT WAS A WEEK AGO !!!!!!!!!!!!!! ALL OF US GOT SCREWED !!!!!!!!!!! I sent wotofo 5 emails.. asking wtf ?????????? not a word or peep.. shipped on nov 27 th from fremont cali.. priority mail… Still shows never accepted by USPS.. dec 5 th…….. what a scam.
After watching this video, I think I prefer the new Vandy Vape Mesh V2 RDA. It has an angled AF and the honeycomb air holes are close together along with deeper juice wells. It also comes with 3 types of mesh strips. Mike did a review on it. (I just ordered one.) It doesn't have the juice channels in the ceramic block that the Profile 1.5 has. Mr.JustRight1 says that the juice channels were designed to allow more e liquid to flow into the cotton to prevent dry hits. You decide.
i run 110 watts(4.4V) on my profile everyday. 135 watts (5.0V) is the most it can handle, needs more airflow. this 1.5 looks to be a big miss… undersized coils compared to vv mesh v2, top airflow that dilutes the ☁️ instead of hitting the mesh and adding to it. that wavy ceramic plate is a joke right? it appears to me to be an evolution of the conversion cap not an evolution of the profile.
Got mine yesterday. Find the original better tbh. Holds juice better and not needed to squonk as much (aware that the mesh is bigger) flavour is not far off the same tbh
Notification Squad!!!
I might be the only person on the planet to have hated the original profile. I hated it with a passion. Couldn't get it to wick right no matter what i did. After about 2 weeks, i ended up throwing both my profile rdas across the street. I'm going to give the 1.5 a try.
Great review, but I'll be sticking with my original profile. The new one will use more cotton and therefore more juice. I have never found I needed more than 50watts. Please review the Topside Lite though! I'm desperate to know how much it weighs compared to the original paperweight
Name of your mod? I interest in mod more than entire review
Someone should design a mesh mtl rta tank… tell wotofo can give me a royalty check for the idea.?
Great review Mike don’t trust em scared of dry hits but glad you like it give me the rebirth or intake dual all day
Thank you Mike for a great Review.
Once the clone is out on the market, I will try with 316 500 mesh and TC on my Luxotic DF with Arctic Fox FW 😉
@Wotofo I will wait until the clone of this is out. You still put the Coily clone in your products, I buy only clones of your products until you stop using the Coily clone!
Crisp vid
Do you like mesh ? I like it a little more after using your wicking tutorial but I think I still like my regular wire with a 3 stranded Clapton
Can someone tell me where you can purchase atm building deck.
wotofo completely fucked thousands of customers.. It was to be shipped from USA california nov 25 th… Everyone that bought the profile 1.5 shows it was shipped by wotofo from california (fremont) on nov 27 th…. most of us including me paid for priority USPS shipping <<<<< It shows via tracking handed over to a 'SHIPPING PARTNER (NEWGISTICS) THAT WAS A WEEK AGO !!!!!!!!!!!!!! ALL OF US GOT SCREWED !!!!!!!!!!! I sent wotofo 5 emails.. asking wtf ?????????? not a word or peep.. shipped on nov 27 th from fremont cali.. priority mail… Still shows never accepted by USPS.. dec 5 th…….. what a scam.
After watching this video, I think I prefer the new Vandy Vape Mesh V2 RDA. It has an angled AF and the honeycomb air holes are close together along with deeper juice wells. It also comes with 3 types of mesh strips. Mike did a review on it. (I just ordered one.)
It doesn't have the juice channels in the ceramic block that the Profile 1.5 has. Mr.JustRight1 says that the juice channels were designed to allow more e liquid to flow into the cotton to prevent dry hits. You decide.
Could you bypass the mess and put a regular coil in it?
Few more days. The waiting is almost killing me!
When does this come out?
Profile is the best thing ever made I woukd probably use these until I quit vaping if ever.
The mesh strip is also bigger
The original is 16×6.8 the new ones are 18×8.5 i believe
I have and love version 1 .I'll wait for version 2 tho.
i run 110 watts(4.4V) on my profile everyday. 135 watts (5.0V) is the most it can handle, needs more airflow. this 1.5 looks to be a big miss… undersized coils compared to vv mesh v2, top airflow that dilutes the ☁️ instead of hitting the mesh and adding to it. that wavy ceramic plate is a joke right?
it appears to me to be an evolution of the conversion cap not an evolution of the profile.
Kinda feels like the “dual coil” version of the profile to me.
if vaping doesn't work out you could always become a hairdresser ?
Shame hasn't got spring loaded clamps.
I dont see anything that would make me want this. My original profile does the job just fine.
Got mine yesterday. Find the original better tbh. Holds juice better and not needed to squonk as much (aware that the mesh is bigger) flavour is not far off the same tbh