I've got the Krixus, what Mike forgot to mention is that the tank get real hot, real quick towards uncomfortable. The drip tip is delrin inner for a reason. Try other drip tips and you may get a shock. The coil element is easy to re-wick so it needs to be because it go's black pretty quick and the flavor of the ceramic element coil brings to the table fades. The tank has a issue the last 0.6ml (est) of liquid is trapped at the bottom and unable to feed in the juice holes. The tank is the biggest juice guzzler that I own you will find you use more juice then ever just on normal use, witch is counter productive on couple dollars saved on wire. Now the coil is thin, small, off center. My biggest gripe with it, it's ment to last up to six months I received close to six hours the coil now has a internal short and un-usable at $16.95 for a replacement. You can build a vertical coil in yes but I didn't buy it for that. It came with two coils however I don't think I will be using the other one more likely I'm over it and I'll put it on ebay. (yes flavor was crisp and smoother, but a good RDA is better in flavor). You may see my comment as griping or venting but it is what it is and it's my experience with the Krixus.
Hate the tank! Coils fall apart or burn out in a couple days. Leaks badly after each fill. It's just a pos paperweight now. No help from manufacturer, stay away from this tank!
I just got one of these tanks yesterday, so far so good. good vapor production, great flavor. But I'm not retiring the Smok TFV4 just yet.
I will update in 3 days, after the 1st wick change, hopefully I got a golden coil as opposed to the one of the failures I read on the reviews.
I'm also not dry burning it @ 30W trying 20-25W for the 1st dry burn. As I also read reports of coils getting jacked up at @ the recommended 30W dry burn.
Running this tank on a basic old no frills Kbox 120W @ 70W
hi Mike. I'm just need to ask you a question. I just got this Tank with me. I have an issue. I cant fire this at 60wat. Under temperature control. I have it at 450f , 50wat. Each time when I go up to 60wat , my VT133 would say ( ohm to hight ) my ohm readings is at 0.35 . Could you explain what's My problem or is it the mod it self. I still get flavor and vapor production is OK.
Omg..sorry man..I realy can't say. All I know is, it's on temperature mode. Because I can't fire it on Wantage mode. On wattage mode, when I go up to 60wat, after firing it says..ohm to Hight ( flashing ) dose vt133 has the mode for tungsten? I normaly don't use temperature control.
+Mike Vapes hey mike im having an issue running this tank on my RX200 no matter what mode im in tungsten or wattage, after i vape a few times i get an atomizer short error message and have to unscrew the tank and screw it back down… im wondering if the 510 on the tank is too short to make a solid connection… do you have the same issue?
Yeah man same here, just broke my first coil today as I was watching this video. I was trying to re-wick it everything was cool until I tried screwing the tank back on and it wouldn't so I tried unscrewing the coil to fix the cotton and the whole thing came out at least I wasn't the only one lol
Can't get mine to work properly. On both the provided coils, the tank won't produce good amounts of vapor, and it looks like all the heat is almost completely tranferred to the base of the tanl. Can't vape it for more than 10, 15 puffs and then it gets hot like the sun, you can't put your hands on it.
hey mike, please re-take this video, this tank is totally useless, its rubish. mine got cracked immediately, other coil have a shortcut issue. my friend bought it but he got the same issues with it. i search the internet, forums etc. , couldnt find one user that satisfied with this rubish. please dont recommend it anymore, the supllier have also confirmed that they had a production issues and they "said we are sorry" cmoon
One thing I don't do anymore to prevent leaks. I no longer Prime my Coils. I put new Coils in & just check the Ohms reading to indicate a connection. Then just fill the Tank & wait at least 20 mins before I vape it. I start at 30 Watts & gradually increase the Wattage. Waiting 2 mins or more between Vapes. I have less leaks now from over priming the Coil like in the past.
I realize these have been out for a couple yrs now but I just bought 1 for $27 & with a buy one get one free deal, so I paid $27 for 2 tanks. It's my first crack at any kind of rebuildable. I wanted to start simple. Luckily they do now have replacement heating elements. I didn't think about that till I watched your video & you made me panic. LoL Vapor DNA actually has them on sale right now marked down from $14 ea to $4.99. Hopefully with the four coil heads that come with the tanks & the extra cotton I bought, I won't need to worry about extra heads anytime soon. The tanks will be here today some time, I'm so excited to try them with my Snowwolf. ? Thanks for the video!
these coils run $13.95 each at myvaporstore.com
Great review as always! Can it be used for mouth to lung?
What's the lowest wattage you can Vape this tank to?
What Temperature Control Mode Would You Use To Vape This Tank To, Nickel or Titanium or Stainless Steel?
I've got the Krixus, what Mike forgot to mention is that the tank get real hot, real quick towards uncomfortable. The drip tip is delrin inner for a reason. Try other drip tips and you may get a shock. The coil element is easy to re-wick so it needs to be because it go's black pretty quick and the flavor of the ceramic element coil brings to the table fades. The tank has a issue the last 0.6ml (est) of liquid is trapped at the bottom and unable to feed in the juice holes. The tank is the biggest juice guzzler that I own you will find you use more juice then ever just on normal use, witch is counter productive on couple dollars saved on wire. Now the coil is thin, small, off center. My biggest gripe with it, it's ment to last up to six months I received close to six hours the coil now has a internal short and un-usable at $16.95 for a replacement. You can build a vertical coil in yes but I didn't buy it for that. It came with two coils however I don't think I will be using the other one more likely I'm over it and I'll put it on ebay. (yes flavor was crisp and smoother, but a good RDA is better in flavor). You may see my comment as griping or venting but it is what it is and it's my experience with the Krixus.
Hate the tank! Coils fall apart or burn out in a couple days. Leaks badly after each fill. It's just a pos paperweight now. No help from manufacturer, stay away from this tank!
My krixus got posted from fasttech today. Im a big Rta man but this intrigues me.
I just got one of these tanks yesterday, so far so good. good vapor production, great flavor. But I'm not retiring the Smok TFV4 just yet.
I will update in 3 days, after the 1st wick change, hopefully I got a golden coil as opposed to the one of the failures I read on the reviews.
I'm also not dry burning it @ 30W trying 20-25W for the 1st dry burn. As I also read reports of coils getting jacked up at @ the recommended 30W dry burn.
Running this tank on a basic old no frills Kbox 120W @ 70W
hi Mike. I'm just need to ask you a question. I just got this Tank with me. I have an issue. I cant fire this at 60wat. Under temperature control. I have it at 450f , 50wat. Each time when I go up to 60wat , my VT133 would say ( ohm to hight ) my ohm readings is at 0.35 . Could you explain what's My problem or is it the mod it self. I still get flavor and vapor production is OK.
Omg..sorry man..I realy can't say. All I know is, it's on temperature mode. Because I can't fire it on Wantage mode. On wattage mode, when I go up to 60wat, after firing it says..ohm to Hight ( flashing ) dose vt133 has the mode for tungsten? I normaly don't use temperature control.
did you notice any lag in the ramp up vs kanthal or does it work just the same?
+Mike Vapes hey mike im having an issue running this tank on my RX200 no matter what mode im in tungsten or wattage, after i vape a few times i get an atomizer short error message and have to unscrew the tank and screw it back down… im wondering if the 510 on the tank is too short to make a solid connection… do you have the same issue?
Yeah man same here, just broke my first coil today as I was watching this video. I was trying to re-wick it everything was cool until I tried screwing the tank back on and it wouldn't so I tried unscrewing the coil to fix the cotton and the whole thing came out at least I wasn't the only one lol
Can't get mine to work properly. On both the provided coils, the tank won't produce good amounts of vapor, and it looks like all the heat is almost completely tranferred to the base of the tanl. Can't vape it for more than 10, 15 puffs and then it gets hot like the sun, you can't put your hands on it.
my ohm jumps badly
hey mike, please re-take this video, this tank is totally useless, its rubish. mine got cracked immediately, other coil have a shortcut issue. my friend bought it but he got the same issues with it.
i search the internet, forums etc. , couldnt find one user that satisfied with this rubish.
please dont recommend it anymore, the supllier have also confirmed that they had a production issues and they "said we are sorry" cmoon
I'd say at least half of the 30ish .2 ohm v8 coils for my v8 (obv) burned out within the first day or two. amazing tank. shitty coils.
tank is trash
if anyone is still looking for this tank, vapenw.com has it on clearance for $5! no joke, $5
leaked all my juice in first try. from the air flow wholes
any ideas?
Mike, Buy one Krixus, get one Free here https://vaporider.net/shop/clearance/horizon-krixus-rewickable-ceramic-tank/
I got both tanks at the link Below 🙂
One thing I don't do anymore to prevent leaks. I no longer Prime my Coils. I put new Coils in & just check the Ohms reading to indicate a connection. Then just fill the Tank & wait at least 20 mins before I vape it. I start at 30 Watts & gradually increase the Wattage. Waiting 2 mins or more between Vapes. I have less leaks now from over priming the Coil like in the past.
I can't get mine to screw back shut please someone help
I realize these have been out for a couple yrs now but I just bought 1 for $27 & with a buy one get one free deal, so I paid $27 for 2 tanks. It's my first crack at any kind of rebuildable. I wanted to start simple. Luckily they do now have replacement heating elements. I didn't think about that till I watched your video & you made me panic. LoL Vapor DNA actually has them on sale right now marked down from $14 ea to $4.99. Hopefully with the four coil heads that come with the tanks & the extra cotton I bought, I won't need to worry about extra heads anytime soon. The tanks will be here today some time, I'm so excited to try them with my Snowwolf. ? Thanks for the video!