i keep on searching how to compare the clone and legit one, some people says it only proved by looking at the serial number but i am not totally satisfied by that simple fact can someone tell me how is it check or compared from a clone ?
Hi mike, can you please help me in my big problem hahah ? Avocado 24 rdta or medusa rdta/rda haha which one you prepared ? thank you in advance mike :)))
I know this is a year plus old, but I owe it to this little guy to state : hands down, to this day, this is my absolute favorite tank out there for flavor and overall satisfying vape experience. this thing chucks thick, dense, delicious plumes of vapor. it's a breeze to build with the large velocity deck and it's capable of housing some beefy, chunky coils with those huge lead ports. It is definitely a tinkering atty, as wicking requires some practice. trial and error. But it's WORTH the tinker. Overall, it's fairly simple to wick, as long as each tail is thinned out, allowing proper wicking. How he cuts the tails at an angle before placing them in, then only tucking a thin section of each tail is optimal and perfectly done. HOWEVER, the wicks do NOT have to be as long as shown in this video. Maybe half that length. My wicks go halfway down the tank. When liquid levels get low, tilting of the tank while vaping wicks it. This allows chain vaping. this is why he got dry cotton while vaping, because there was too mug distance tmfor he liquid to travel while vaping. Second trick is, after wicking, create a small space for air to travel between the tank and the deck, by using aomethjbg small and thin (i use 20g wire or a micro screw driver) and poke a hole between the wick and the edge of each wick hole/port. this will allow for optimal wicking and Give you the best possible wicking capable. THIS IS THE KEY TO THIS ATTY! You will never get a dry hit, even while chain vaping. So as you vape, the coils wick just flawlessly. The flavor this thing puts out is just ridiculous. it's on par with the best flavor chasing rdas I use. I cannot say enough good things about this guy. it's one of my daily bangers, in my daily rotation, and one of my go to tanks for road trips. I just love it. it shines in single coil imo, but it's great in dual coil mode also. Just go buy this. there a reason I have 3x myself : a stainless, a black , and a copper version. the frosted glass is the icing on the cake, a sweet feature that is unique and aesthetically pleasing. By FAR the best version of the avocado, basically the amazing 22mm version on steroids, offering massive improvements all across the board, taking an already great atty and making it perfection. Zero negatives on this guy once you learn it.
Cant unscrew the glass part of the tank. I already remove the pin. I want to change the glass but it wont remove.. any idea I try many things but I cant unscrew it.
hi Mike.. i'm your fan.. i need your recommendation.. i want to buy new atomizer.. but i dont know which 1 should i buy.. i'm using Geekvape Aegis.. i'm looking for dual coil atomizer.. either Medusa RDTA.. Peerless RDTA or this Avocado.. which 1 is the best?
I had this. Big complaint was that single airflow adapter. I'm glad you had trouble with it. I had 2 in total both of em did that. Also the screws strip out easily. Great vape.. At first. Great videos tho Mike. I watch you all the time.
Bought this, but I could never get it to work at all, dry hits, hard to build and basically sux. Tried it serval times but never worked at all. sitting collecting dust and waste of money. Got to be the worst RTA there is, even when the juice is below the cotton you have to tilt the RTA and juice only get's to the cotton on one side.. What were they thinking? And you for saying it is not a problem. When there is like 1ml left when you tilt it it only saturates one side of the cotton.
compatible with istick pico mini?
You inserting the ceramic block in wrong way
It's an RDTA!
You're the only youtuber I know that actually checks tank capacity. I really appreciate it, Mike.
i keep on searching how to compare the clone and legit one, some people says it only proved by looking at the serial number but i am not totally satisfied by that simple fact can someone tell me how is it check or compared from a clone ?
quick one, should I get avocado 24 or abs engine? I have the limitless RDTA already
Hi mike, can you please help me in my big problem hahah ? Avocado 24 rdta or medusa rdta/rda haha which one you prepared ? thank you in advance mike :)))
Mike I just can't decide between the new Wotofo SMM (Matts)and avocado. Need easy to build on and flavor. What would you do?
I know this is months old, but mine gets too hot on the metal part, is that expected or maybe the coils are to close to the metal parts?
Open up your thoughts to me!
I bet you'll get a full ml in the wicks…
Chose this as my first RDTA. Thanks for the review.
Hi mike is vgod rdta better or avocado 24? Everyone recommends avocado what do u say ?
I know this is a year plus old, but I owe it to this little guy to state : hands down, to this day, this is my absolute favorite tank out there for flavor and overall satisfying vape experience. this thing chucks thick, dense, delicious plumes of vapor. it's a breeze to build with the large velocity deck and it's capable of housing some beefy, chunky coils with those huge lead ports. It is definitely a tinkering atty, as wicking requires some practice. trial and error. But it's WORTH the tinker. Overall, it's fairly simple to wick, as long as each tail is thinned out, allowing proper wicking. How he cuts the tails at an angle before placing them in, then only tucking a thin section of each tail is optimal and perfectly done. HOWEVER, the wicks do NOT have to be as long as shown in this video. Maybe half that length. My wicks go halfway down the tank. When liquid levels get low, tilting of the tank while vaping wicks it. This allows chain vaping. this is why he got dry cotton while vaping, because there was too mug distance tmfor he liquid to travel while vaping. Second trick is, after wicking, create a small space for air to travel between the tank and the deck, by using aomethjbg small and thin (i use 20g wire or a micro screw driver) and poke a hole between the wick and the edge of each wick hole/port. this will allow for optimal wicking and Give you the best possible wicking capable. THIS IS THE KEY TO THIS ATTY! You will never get a dry hit, even while chain vaping. So as you vape, the coils wick just flawlessly. The flavor this thing puts out is just ridiculous. it's on par with the best flavor chasing rdas I use. I cannot say enough good things about this guy. it's one of my daily bangers, in my daily rotation, and one of my go to tanks for road trips. I just love it. it shines in single coil imo, but it's great in dual coil mode also. Just go buy this. there a reason I have 3x myself : a stainless, a black , and a copper version. the frosted glass is the icing on the cake, a sweet feature that is unique and aesthetically pleasing. By FAR the best version of the avocado, basically the amazing 22mm version on steroids, offering massive improvements all across the board, taking an already great atty and making it perfection. Zero negatives on this guy once you learn it.
Hi from Philippines ?
In case no one's said it yet, put the ceramic block on the other side Mike! It has an indent to fit on the juice fill door.
Cant unscrew the glass part of the tank. I already remove the pin. I want to change the glass but it wont remove.. any idea I try many things but I cant unscrew it.
hi Mike.. i'm your fan.. i need your recommendation.. i want to buy new atomizer.. but i dont know which 1 should i buy.. i'm using Geekvape Aegis.. i'm looking for dual coil atomizer.. either Medusa RDTA.. Peerless RDTA or this Avocado.. which 1 is the best?
Got mine today. Finally a geek vape tank that doesn't leak!!
I had this. Big complaint was that single airflow adapter. I'm glad you had trouble with it. I had 2 in total both of em did that. Also the screws strip out easily. Great vape.. At first. Great videos tho Mike. I watch you all the time.
Confusion always…
Rdta not rta
Bought this, but I could never get it to work at all, dry hits, hard to build and basically sux. Tried it serval times but never worked at all. sitting collecting dust and waste of money. Got to be the worst RTA there is, even when the juice is below the cotton you have to tilt the RTA and juice only get's to the cotton on one side.. What were they thinking? And you for saying it is not a problem. When there is like 1ml left when you tilt it it only saturates one side of the cotton.
love your reviews sir.
Thanks Mike…..just put this on my buy list …thanks for your rewiews