Hello Mike, nice review… I need a help from you, for my two big problems now, because I quit with smoking before two months by help of the Vaporesso LUXE PM40 POD. Than I was bought VOOPOO DRAG S POD, VOOPOO ARGUS X PRO POD MOD KIT, INNOKIN KROMA Z (which is best POD by now for me for MTL vaping), then I decided to buy some serious DIY vaping stuff and I was bought new MODE (Eleaf iStick Power 2 – black mate version) and new RTA MTL ATY by VandyVape Berserker V3 – black mate version, and I have two questions (for my two problems) for you, and your answers will help me a lot… 1. Can I charge my new MODE (Eleaf iStick Power 2) with wall adapter with 2A (I live in the Belgrade, Serbia), because in manual instructions said that's this MOD can charge with fast charger or with 2A, but in local store where I was bought this MOD said this: "The battery is charged via a new generation USB port, Type C. The maximum charging current is 2A, for fast charging. This option should only be used occasionally as it drastically reduces the capacity and life of the battery. It is recommended that the battery be charged at a current of max 1A." Because of that I'm not sure if it's wrong to charge my new MOD with 2A power? What to doing about that? To charge safely on 2A or 1A? 2. I was bought in same store Berserker V3 RTA MTL ATY, and I have only one issue with them, this little tank which is coming install on atomizer is to small to see amount of liquid in the tank; reserve very big tanks (two in the box, one glass, one yellow by PEI). I'm interested to buy or make somehow a little bigger tank than this of 2ml how I will be able to see amount of liquid, but not to big because my MOD is small and with that bigger tanks in the box pf atomizer, that's everyone said that Berserker V3 with that tanks (6-7ml of liquid) leaks a bit, and for me that bigger tanks looking very, very ugly on my new MOD. I just need a same tank like this by 2ml, but a little bigger, 3 to 4ml, in other words I need replacement tank with 24mm diameter which will be compatible with my atomizer. Can I buy something like that from different brands which will be compatible, like as Innokin ARES D24 RTA MTL ATY (just replacement tank of 3 or 4ml, I'm not sure how much is it or some else), or to build somewhere identical tank (in the diameter) but a little higher (1cm – 1.5cm), to be fully compatible with my Berserker B3, to means that I don't have any issues with leaking or with fake air. Any suggestions will be appreciated… Greetings from the Serbia…
Great video. As always you nailed it. But one correction. There was one company that made something similiar. Voopoo with original Argus air pod gave one pod and second one with removable coil. So Lost Vape is not a first company to do that.
my 0.6ohm coil got burned after 2 days of moderate usage. damn, this is a really nice device but their coils are crap (same story with ursa nano non pro)
Just incase anyone is wondering in UK the device feels great and works great but… we can get 0.8 1.0 pods – the 0.8 pod is very underwhelming in flavour and also it leaks a little
All reviewers forget the most important point… How's the flavor ? That should be the top priority. The device may have 1000 features but how's the flavor, throat hit etc compared to others? I'm sure people want to know how it vapes and not more about it's functions. It could be a bloody simple plain tube for what i care but if it gives the best flavor that's the one i'm going for , as end of the day i'm vaping it for the flavour,nic hit to satisfy me. The reviewers have forgotten the main point after all this years.. In the start it was all about flavors.. and now it's about stupid functions , lanyard, lights etc etc
Not a bad looking device but the rubber plug is a no sale for me. Great review as always Mike!❤??
are the interchangeable pods usable on the ursa baby?
i just bought this today. but i prefer 17W on 0.8. default W was 9 and its taste like shit
Those are cool! Thanks for the review!
Okay I like this one. The matte black one.
There is the l'andare….i will get it . Great review thx Mike
Hello Mike, nice review…
I need a help from you, for my two big problems now, because I quit with smoking before two months by help of the Vaporesso LUXE PM40 POD. Than I was bought VOOPOO DRAG S POD, VOOPOO ARGUS X PRO POD MOD KIT, INNOKIN KROMA Z (which is best POD by now for me for MTL vaping), then I decided to buy some serious DIY vaping stuff and I was bought new MODE (Eleaf iStick Power 2 – black mate version) and new RTA MTL ATY by VandyVape Berserker V3 – black mate version, and I have two questions (for my two problems) for you, and your answers will help me a lot…
1. Can I charge my new MODE (Eleaf iStick Power 2) with wall adapter with 2A (I live in the Belgrade, Serbia), because in manual instructions said that's this MOD can charge with fast charger or with 2A, but in local store where I was bought this MOD said this:
"The battery is charged via a new generation USB port, Type C. The maximum charging current is 2A, for fast charging. This option should only be used occasionally as it drastically reduces the capacity and life of the battery. It is recommended that the battery be charged at a current of max 1A."
Because of that I'm not sure if it's wrong to charge my new MOD with 2A power? What to doing about that? To charge safely on 2A or 1A?
2. I was bought in same store Berserker V3 RTA MTL ATY, and I have only one issue with them, this little tank which is coming install on atomizer is to small to see amount of liquid in the tank; reserve very big tanks (two in the box, one glass, one yellow by PEI). I'm interested to buy or make somehow a little bigger tank than this of 2ml how I will be able to see amount of liquid, but not to big because my MOD is small and with that bigger tanks in the box pf atomizer, that's everyone said that Berserker V3 with that tanks (6-7ml of liquid) leaks a bit, and for me that bigger tanks looking very, very ugly on my new MOD. I just need a same tank like this by 2ml, but a little bigger, 3 to 4ml, in other words I need replacement tank with 24mm diameter which will be compatible with my atomizer. Can I buy something like that from different brands which will be compatible, like as Innokin ARES D24 RTA MTL ATY (just replacement tank of 3 or 4ml, I'm not sure how much is it or some else), or to build somewhere identical tank (in the diameter) but a little higher (1cm – 1.5cm), to be fully compatible with my Berserker B3, to means that I don't have any issues with leaking or with fake air. Any suggestions will be appreciated…
Greetings from the Serbia…
Caliburn X is sexist
just wondering who steve really is.. ??
? at the big plug
looks very nice…..
❓️ DOES ANYONE WANT 2 KNOW HOW THE FLAVOR IS??
caliburn x or ursa pro? which one?
I use that item and I like it
Great video. As always you nailed it. But one correction. There was one company that made something similiar. Voopoo with original Argus air pod gave one pod and second one with removable coil. So Lost Vape is not a first company to do that.
RTAs ……please ….☝?☝?☝?☝?☝?♥️
Can we use the same pods as the ursa baby and the ursa nano? @mikevapes @ anyone really..?
my 0.6ohm coil got burned after 2 days of moderate usage. damn, this is a really nice device but their coils are crap (same story with ursa nano non pro)
Looks like a direct copy of Oxva Xlim
Anyone’s coils here gettijg burnt fast? I use 50/50 not sweet juice and every two days a coil just starts tasting burnt
Ursa pro vs oxva slim?
Just incase anyone is wondering in UK the device feels great and works great but… we can get 0.8 1.0 pods – the 0.8 pod is very underwhelming in flavour and also it leaks a little
I really don't get why people hate on rubber plugs, I'll use a rubber plug and you use a caliburn top fill and we'll see who wastes more juice!
How many puffs before battery dies?
All reviewers forget the most important point… How's the flavor ? That should be the top priority. The device may have 1000 features but how's the flavor, throat hit etc compared to others? I'm sure people want to know how it vapes and not more about it's functions. It could be a bloody simple plain tube for what i care but if it gives the best flavor that's the one i'm going for , as end of the day i'm vaping it for the flavour,nic hit to satisfy me. The reviewers have forgotten the main point after all this years.. In the start it was all about flavors.. and now it's about stupid functions , lanyard, lights etc etc