I will not buy another Augvape product ever again. I have been vaping for two years and had spent over $1000 on vaping gear, and Augvape is the worst company I have come across.
Merlin RTA base leaks under the AFC ring, it is a well known fact. I liked the atomizer and I have sent them multiple emails, and posted on their official FB page, asking them, not to send me, but to sell me the replacement base. They just keep ignoring me.
There is a mile long thread about Merlin RTA on vapingunderground forum, where a lot of people complained about the same treatment from Augvape. They just play dumb and ignore their customers.
Just like mine .. my dual coil deck the holes in the chamber are covered but there is enough gap for juice to flow through it so it's fine.. anyways that's what I thought lol.. first off all many people think that this tank has juice flow control it doesn't have juice flow control. Your not meant to move the glass back and forth like juice flow control and this tank is not a designed like that. Lot of people think that don't know why .Anyways dual deck doesn't show the 4 holes after screwing the chamber and glass on. but after I unscrewed the dual deck out of the base you will see there is a gold plated pin underneath the dual deck. On the gold plated pin there is a small hole for you to unscrew of the gold plated pin. On dual coil deck u can unscrew of the gold plated pin that's what that small tiny hole on the pin is for, so you can put a small tool through it to unscrew it. So I noticed mine wasn't very tight.. so after removing the pin and putting it back properly by using a tool and I made sure it was nice and tight.. ok .. then when I went to put the deck back I noticed it went back into the base more freely and it went round about 6 times for it to be tight. and I wicked it up and when i went to put the glass and chamber back on like the way you put it on your video and guess what? The holes are now showing on all holes.. and I have screwed it on soooooo tightly.. I was like what!!??? So I don't know maybe that's why many people say the holes don't show I think we was not screwing the deck onto the base properly. And I don't know if that gold plated pin on the dual deck helped by being tighten down hard..
As I said this ain't no juice controller tank as you aware many people think that. If I try tighten more it will break loool that's how tight I did it and all 4 holes are showing on the dual deck.. crazy as I thought not showing was the way it was meant to be..
And btw the vape is soooooooooo much better.
So give it a go bro.. please let me know what you think..
Have a nice day keep up good work love your videos..
So yeah it's crazy no matter how hard I full screw tightly the tank the 4 holes are now always showing..
Anyways below is a message from augvape for people who claim this tank was designed for juice control
EDIT After feedback from Augvape via @nms122 it seems that my intial assumption regarding the juice control was right and the tank designer did not include juice flow facility. The air bubbles detach just fine with the tank fully screwed down and flavour isnt harmed in the process.
The Assad dictatorship is more criminal than isis Let's say that isis killed 3,000 people But Assad's regime killed one million people, many of them children and women, and were killed in a sectarian and racist way Also the Assad prisons that contain brutal torture that humanity has never known before If you want to express that Isis is a criminal, you also have to express who is more criminal a million times, you have to fuck to the Assad a thousand times, Mike I hope you to wear a shirt written on it to crush the guilty dictator Assad, please do that Mike in the next video, for the children killed by the planes and soldiers of Assad, and to look fair Mike Who deserves more defamation than Mike? Who killed 3,000-5,000 people or who is killed one million people and left 15 million people from their homeland? Who deserves more defamation?
hey mike what'up !! can i tell u something? why im using merlin mini rta and when i drop my flavor insinde and the flavor always dripp? tell me as fast as u can mike thx im in problem now
Nice Shirt! 🙂
yeah…. fuck ISIS
Great RTA Mike so nice looking and love the flavour
On Gearbest it's for 19.74 dollars with coupon code: ECIG15OFF
http://www.gearbest.com/rebuildable-atomizers/pp_606827.html?wid=21&lkid=10581720
Gearbest is a pretty good online store, so it should be fine.
Having leaking problems Mike tried every wicking but still leaking issues
I will not buy another Augvape product ever again. I have been vaping for two years and had spent over $1000 on vaping gear, and Augvape is the worst company I have come across.
Merlin RTA base leaks under the AFC ring, it is a well known fact. I liked the atomizer and I have sent them multiple emails, and posted on their official FB page, asking them, not to send me, but to sell me the replacement base. They just keep ignoring me.
There is a mile long thread about Merlin RTA on vapingunderground forum, where a lot of people complained about the same treatment from Augvape. They just play dumb and ignore their customers.
fuck isis!
THANKS A LOT FOR THE REVIEW, I'M A BIG FAN OF YOU MIKE FROM SAUDI ARABIA
AND YEAH (FUCK ISIS)
How do i prevent the spitback mike?
You ever hear that sound just like the radio host from airheads?
merlin mini or the mage gta?
I fukn love my Augvape Merlin Mini RTA and I Vape it every single day and night! AUGVAPE KICKS FUKN ASS!!
Oh yeah, you kick ass too Mike!!! ??????✌
What make is that holder?
I want to get an RTA but I don't know which one to get, Merlin mini RTA, Troll RTA, or Ammit RTA.
Suggestions ??
now i'm wondering this rta came first or the ijoy exo rta ?
Merlin Mini or Geekvape Ammit single/dual anyone??
Thanks for the gr8 review
Nice T shirt by the way
Can this tank fit to my istick mega pico?
Just like mine .. my dual coil deck the holes in the chamber are covered but there is enough gap for juice to flow through it so it's fine.. anyways that's what I thought lol.. first off all many people think that this tank has juice flow control it doesn't have juice flow control. Your not meant to move the glass back and forth like juice flow control and this tank is not a designed like that. Lot of people think that don't know why .Anyways dual deck doesn't show the 4 holes after screwing the chamber and glass on. but after I unscrewed the dual deck out of the base you will see there is a gold plated pin underneath the dual deck. On the gold plated pin there is a small hole for you to unscrew of the gold plated pin. On dual coil deck u can unscrew of the gold plated pin that's what that small tiny hole on the pin is for, so you can put a small tool through it to unscrew it. So I noticed mine wasn't very tight.. so after removing the pin and putting it back properly by using a tool and I made sure it was nice and tight.. ok .. then when I went to put the deck back I noticed it went back into the base more freely and it went round about 6 times for it to be tight. and I wicked it up and when i went to put the glass and chamber back on like the way you put it on your video and guess what? The holes are now showing on all holes.. and I have screwed it on soooooo tightly.. I was like what!!??? So I don't know maybe that's why many people say the holes don't show I think we was not screwing the deck onto the base properly. And I don't know if that gold plated pin on the dual deck helped by being tighten down hard..
As I said this ain't no juice controller tank as you aware many people think that. If I try tighten more it will break loool that's how tight I did it and all 4 holes are showing on the dual deck.. crazy as I thought not showing was the way it was meant to be..
And btw the vape is soooooooooo much better.
So give it a go bro.. please let me know what you think..
Have a nice day keep up good work love your videos..
So yeah it's crazy no matter how hard I full screw tightly the tank the 4 holes are now always showing..
Anyways below is a message from augvape for people who claim this tank was designed for juice control
EDIT After feedback from Augvape via @nms122 it seems that my intial assumption regarding the juice control was right and the tank designer did not include juice flow facility.
The air bubbles detach just fine with the tank fully screwed down and flavour isnt harmed in the process.
Augvape will confirm that if u contact them
nice shirt !
The Assad dictatorship is more criminal than isis
Let's say that isis killed 3,000 people
But Assad's regime killed one million people, many of them children and women, and were killed in a sectarian and racist way
Also the Assad prisons that contain brutal torture that humanity has never known before
If you want to express that Isis is a criminal, you also have to express who is more criminal a million times, you have to fuck to the Assad a thousand times, Mike
I hope you to wear a shirt written on it to crush the guilty dictator Assad, please do that Mike in the next video, for the children killed by the planes and soldiers of Assad, and to look fair Mike
Who deserves more defamation than Mike? Who killed 3,000-5,000 people or who is killed one million people and left 15 million people from their homeland? Who deserves more defamation?
hey mike what'up !! can i tell u something? why im using merlin mini rta and when i drop my flavor insinde and the flavor always dripp? tell me as fast as u can mike thx im in problem now
Mike you forgot to put the link to the E-Juice below.
I would like a shirt that say "F*ck Trump"
Good video