hey mike, thanks for the review. I am wondering what kind of wire cutters you are using, I cant find anything suitable at the local hardware store. Thanks.
If you had a tank or rda that has a 810 drip tip that came with the 510 adapter such as the icon rda, or even the tfv8 or v12 since it's a 810 bored. You could just use that or you can buy a 510 adapter for 810 size. But I see what he's saying
I just received mine a gold edition I'm loving it and thanks to the site you put up to get one fast delivery and amazing prices as well great job Mike vapes !
How would you compare this to the Tsunami 22mm RDA? I've got the Tsunami and love it, but am in the market for another RDA and I'm wondering how the two compare to one another.
You managed the retarded build deck well Mike. I say it's retarded because despite it looking like it's an easy build deck, it's designed in a way that would make running a 1 big coil and 1 small coil build (obviously that's impossible) the ideal, easiest build in it. If u run equal size coils (which is 100% of the time) you'll have to use the same post holes for both coils. To me, in a world where there are so many deck options to avoid that, that's a huge con. This rda specifically doesn't even make it easy for you to do that even if that doesn't bother you because the post holes are slim and wide (not much room to stack coil leads). Plus, due to them being rectangular/undivided it becomes finicky because your leads will slide around. Also, o-ring tolerances suck in this rda. A good o-ring tolerance on an rda of this style would be a tighter fit on deck to barrel/top cap and a looser fit on the af adjustment top cap to the barrel. That way barrel stays in place and doesn't spin when you're trying to adjust af AND barrel doesn't come off with the top cap when you want to remove the top cap to drip or access your build. Af adjustment top cap o-ring is too big and it's a bitch adjusting af on this. I close off af every time it's going back in my pocket and with this rda, I either have to take the entire top cap and barrel off in one piece and adjust af that way or take the top cap and barrel off in one purse THEN separate the af adjustment top cap from the barrel and put it on in a way that all af holes are closed. Either the barrel spins with the top cap or it comes off with the top cap as one piece. O-ring tolerances are so important when designing an rda (especially a 3 piece rda) and a lot of rda designers fuck that part up. Hopefully that becomes something manufacturers pick up on and start choosing the optimal size o-rings.
Great reviews as always Mike! I just got my Peerless special edition in the mail today! Gotta say if I hadnt watched your review of it so many times I wouldnt have known exactly how to build on it immediately! Love the airflow on this dripper too! (And my dPro Drip tip fits perfectly)
This gold edition is stunning!!! as for ur one con, I Always have to have a 510 drip tips or adapters, I can't use wide open type styles. Thank you for such a great review, I have learned so much about about building, just by watching all your videos! 🙂
I got this rda a while ago. I first tried using the two middle lower posts for a large but only 5 wrap fused clapton. The fuckin legs wouldn't stay pinched. I was having a hard time reaching that outer post. I just watched this video? Amazing method of screwing the inner leg first THEN pushing it over to reach the outer post! That, ladies and gentlemen is why Mike is the best! Thanks buddy….yassou.
I watched a video where they only used the two center posts. I didn't realize you could do that. I've been building like you did in this video. I'm going to try the two center posts without using the outside posts.
I didn't care for the original. Really butt ugly. I bought the gold special edition to use with a 0.47ohm series build with a stacked brass Vaperz Cloud 11:11. Works and looks great!
I still haven't gotten one of these, they aren't pushing them anymore in their marketing (they might be gone soon). I really need to grab one when I can, the loop just doesn't match up from what I've seen and heard.
Is it safe for hybrid mod mike ?
Would you consider that 510 pin safe to adjust?
hey mike, thanks for the review. I am wondering what kind of wire cutters you are using, I cant find anything suitable at the local hardware store. Thanks.
If you had a tank or rda that has a 810 drip tip that came with the 510 adapter such as the icon rda, or even the tfv8 or v12 since it's a 810 bored. You could just use that or you can buy a 510 adapter for 810 size. But I see what he's saying
I just received mine a gold edition I'm loving it and thanks to the site you put up to get one fast delivery and amazing prices as well great job Mike vapes !
Picked one up for 20$ , i can't believe how cheap they are …. what a great deal!
How would you compare this to the Tsunami 22mm RDA? I've got the Tsunami and love it, but am in the market for another RDA and I'm wondering how the two compare to one another.
Is this tank suitable for a hybrid mech mod? The contact pin looks adjustable to me but it is not list as one.
You managed the retarded build deck well Mike. I say it's retarded because despite it looking like it's an easy build deck, it's designed in a way that would make running a 1 big coil and 1 small coil build (obviously that's impossible) the ideal, easiest build in it. If u run equal size coils (which is 100% of the time) you'll have to use the same post holes for both coils. To me, in a world where there are so many deck options to avoid that, that's a huge con. This rda specifically doesn't even make it easy for you to do that even if that doesn't bother you because the post holes are slim and wide (not much room to stack coil leads). Plus, due to them being rectangular/undivided it becomes finicky because your leads will slide around. Also, o-ring tolerances suck in this rda. A good o-ring tolerance on an rda of this style would be a tighter fit on deck to barrel/top cap and a looser fit on the af adjustment top cap to the barrel. That way barrel stays in place and doesn't spin when you're trying to adjust af AND barrel doesn't come off with the top cap when you want to remove the top cap to drip or access your build. Af adjustment top cap o-ring is too big and it's a bitch adjusting af on this. I close off af every time it's going back in my pocket and with this rda, I either have to take the entire top cap and barrel off in one piece and adjust af that way or take the top cap and barrel off in one purse THEN separate the af adjustment top cap from the barrel and put it on in a way that all af holes are closed. Either the barrel spins with the top cap or it comes off with the top cap as one piece. O-ring tolerances are so important when designing an rda (especially a 3 piece rda) and a lot of rda designers fuck that part up. Hopefully that becomes something manufacturers pick up on and start choosing the optimal size o-rings.
Great reviews as always Mike! I just got my Peerless special edition in the mail today! Gotta say if I hadnt watched your review of it so many times I wouldnt have known exactly how to build on it immediately! Love the airflow on this dripper too! (And my dPro Drip tip fits perfectly)
This gold edition is stunning!!! as for ur one con, I Always have to have a 510 drip tips or adapters, I can't use wide open type styles. Thank you for such a great review, I have learned so much about about building, just by watching all your videos! 🙂
I hate the build deck
Mike I got this RDA and all I taste is metal and cotton. Any tips? Does it just need to break in longer?
i don't understand why you don't trim your first coil before you place your second one in, looks so awkward
What Mod was he building on?
where do i get those rods at
I got this rda a while ago. I first tried using the two middle lower posts for a large but only 5 wrap fused clapton. The fuckin legs wouldn't stay pinched. I was having a hard time reaching that outer post. I just watched this video? Amazing method of screwing the inner leg first THEN pushing it over to reach the outer post! That, ladies and gentlemen is why Mike is the best! Thanks buddy….yassou.
I watched a video where they only used the two center posts. I didn't realize you could do that. I've been building like you did in this video. I'm going to try the two center posts without using the outside posts.
Can a 1.5 hex tool fit the screws?
Thanx Mike, Just got the Gold one and YES it its Pretty lol
This peerless or mesh rda?
I know this is a little bit of too late. But from rate 1 to 10, how would you rate the flavored on it? Thank you
I didn't care for the original. Really butt ugly. I bought the gold special edition to use with a 0.47ohm series build with a stacked brass Vaperz Cloud 11:11. Works and looks great!
i got one in my box of the special edition
I still haven't gotten one of these, they aren't pushing them anymore in their marketing (they might be gone soon). I really need to grab one when I can, the loop just doesn't match up from what I've seen and heard.