Nice review it looks really nice but I am unsure about the rods transfering the liquid, since I usually chain a few (3-5) kinda worried about dry hits. Is it possible to put the cotton into the tank and remove the rods? Looking for a mesh replacement for my combo rdta…
Definitely one of the best RDTAs! …and the cage looks great! Wicking action gets a bit reluctant though when you get down to a quarter of juice when you vape 3-digit wattage.
hi mike i would like to see a taper hole at the filling. I think it's better to open a clamp with the clapton mesh and then clamp it back over the wadding. good video of you
You really don't need the stainless steel rods when you use regular coil builds in this you just need to run the ends of the cotton down the wick holes. Just my opinion at least on regular coil builds inside this rdta.
Excellent review Mike! You never disappoint! I love watching the build, wick, & VAPE videos!! Mikey does it Best! and Joel "mrjustright1" most definitely does the mesh rebuildables Best!!
I own 3 of the different Profile series RDA/RTA and now RDTA. The OG is amazing and I still you it today as my drip RDA, the Profile Unity RTA is still my favorite RTA ever, and now this bad boy is my go to squanker. I can't get enough of these. Wotofo and #MRJUSTRIGHT1 have done nothing but amazing things. i can't wait for their next product.
Springloaded mesh decks: I just twist the cotton and put it down first then secure it. Then I place the mesh coil on top while still holding the cotton in place. After securing the mesh in place then I let the cotton back up and untwist. It's pretty easy and stops the cotton from snagging or bending the mesh
People seem to prefer the clapton "mesh". I wonder why? Maybe because it isn't mesh at all, but little claptoned wire. Mesh dries my mouth out pretty quick compared to wire or various clapton wires. Some people also like to act like mesh blows everything away for flavor. In my experience, that's not the case at all. It's different yes, but not better by a long shot.
Wow, I wasn't aware it had separate holes for coils. I haven't tried mesh and have been hesitant to buy an atomizer that was dedicated to just mesh in case i didn't like mesh but this has options so I think I'm going to have to get It.
Dude I love your videos , youve just got a new subscriber , your reviews are way better than all the other reviewers , respect from southern Ireland ??
Clapton mesh? Wait What? Is it better than the extreme mesh for the profile rda 1.5? I get amazing flavour with that one. Can you use these coils on the profile 1.5? It seems im way behind.
one of the best RDTA tanks I used. really great work WoToFo. and big thanks to you Mike for your great review. I can't buy anything without watching your reviews man
What's the purpose of the wicking rods never had one and thinking of buying one
Nice review it looks really nice but I am unsure about the rods transfering the liquid, since I usually chain a few (3-5) kinda worried about dry hits. Is it possible to put the cotton into the tank and remove the rods? Looking for a mesh replacement for my combo rdta…
Looks good. One question though…
Does the Clapton Mesh fit the Kylin M?
Mike im still using the recurve rda let me know what u recomend for a single coil user at around 0.3 37w. Its great but is there something better.
Definitely one of the best RDTAs! …and the cage looks great!
Wicking action gets a bit reluctant though when you get down to a quarter of juice when you vape 3-digit wattage.
hi mike i would like to see a taper hole at the filling. I think it's better to open a clamp with the clapton mesh and then clamp it back over the wadding. good video of you
You really don't need the stainless steel rods when you use regular coil builds in this you just need to run the ends of the cotton down the wick holes. Just my opinion at least on regular coil builds inside this rdta.
I’m lucky i guess I didn’t spill a drop liquid is to expensive
What's it leak like?
Excellent review Mike! You never disappoint!
I love watching the build, wick, & VAPE videos!! Mikey does it Best!
and Joel "mrjustright1" most definitely does the mesh rebuildables Best!!
I own 3 of the different Profile series RDA/RTA and now RDTA. The OG is amazing and I still you it today as my drip RDA, the Profile Unity RTA is still my favorite RTA ever, and now this bad boy is my go to squanker. I can't get enough of these. Wotofo and #MRJUSTRIGHT1 have done nothing but amazing things. i can't wait for their next product.
My con is going to be changing to poly instead of leaving it glass.
Springloaded mesh decks: I just twist the cotton and put it down first then secure it. Then I place the mesh coil on top while still holding the cotton in place. After securing the mesh in place then I let the cotton back up and untwist. It's pretty easy and stops the cotton from snagging or bending the mesh
is this flavor just as good as some of the best drippers?
People seem to prefer the clapton "mesh". I wonder why? Maybe because it isn't mesh at all, but little claptoned wire. Mesh dries my mouth out pretty quick compared to wire or various clapton wires. Some people also like to act like mesh blows everything away for flavor. In my experience, that's not the case at all. It's different yes, but not better by a long shot.
I can use it in squonk?
Hey Mike can u help me .can't make my mind up what to buy .the profile rdta or the expromiser rdta
what about the leaking issue on the rdta mode, anyone?
Con – No 510 driptip adapter.
Man i want this rdta. I own the original profile unity mesh rta. And its the bomb definitely want to give this one a try
Wow, I wasn't aware it had separate holes for coils. I haven't tried mesh and have been hesitant to buy an atomizer that was dedicated to just mesh in case i didn't like mesh but this has options so I think I'm going to have to get It.
Dude I love your videos , youve just got a new subscriber , your reviews are way better than all the other reviewers , respect from southern Ireland ??
Clapton mesh? Wait What? Is it better than the extreme mesh for the profile rda 1.5? I get amazing flavour with that one. Can you use these coils on the profile 1.5? It seems im way behind.
i need this XD
one of the best RDTA tanks I used. really great work WoToFo. and big thanks to you Mike for your great review. I can't buy anything without watching your reviews man