Mike, would you say when wicked properly because of those juice channels that this wicks a bit faster than the Crius? I love my Crius tanks, but ability to build more and potential faster wicking, I'm curious about. I've noticed my Crius struggles just a bit when my high VG juice gets a bit cold, which I'm not holding against it, but wondering if this could solve that with those juice channels.
ive lost faith in indulgence … there last few showings have been poop in my opinion, i only watched this video to feed my erection..omg mikes voice lol 😉
I exchanged mine for the Zephyrus v2. The stock coil head separated on me in my pocket and I was not happy. Both coils that came with it had the problem. I bought it strictly for the coils because I already have the MT Rta. Indulgence screwed this one up.
Don't know if I got a bad couple of coils that came with it, but I am not getting much vapor at all even with the air flow wide open. Changed out to the other coil that came with it…the same issue! Sure hope when I try the build deck, it improves. So far, very disappointed.
Great review Mike. Just picked this up. Followed your wicking tutorial to a T; NO LEAKS. 3mm coils are not gonna fit. Don't waste your time folks. They are needed anyway. I have dual fused claptons in mine. 26g clapped with 36g wrapped around a 2mm driver. BARELY fit. My coils are hugging the post. Probably 1mm to .5mm of clearance between. This tank THROWS CLOUDS!!! The RBA versus the pre-made coils is no contest. RBA all DAY. Wish I had copped this prior to the TFV IV mini. #hitthatshit#bestwickingtutorial
Mike, if for some reason you don't get the rba section wicking right and you have to tear it down how are you dealing with the juice in the tank? watching you take it apart I was looking at it and was thinking it would pour the juice out and you unscrew the base from the rest of the tank if you needed to take it apart to rewick.
Hey man, I just wanna say thank you so much for this video. I decided to get the Mutank in part due to your review. I really dig your reviews brotherman. I appreciate your opinions as they seem to be real and honest, and you seem to just be a normal guy like the rest of us. Anyway, I just wicked the rba deck on this beast the way you showed in your video and it's perfect!!! No leaking at all and it's wicking like a champ. Not a single dry hit and I've been chain vaping like a madman since I filled the tank. .3 ohms dual 24g kanthal 6 wraps at 35 watts and the flavor is off the chain. Pretty decent vapor production as well. Thanks again man, and vape the fuck on!!!
Please someone reply PLEASE!!!!!!! does anyone know the clapton coil specs? i want to copy it on my mutank rda deck so its the same as buying the replacement head and could handle 150 watts
In most circumstances and frequently, the tank leaks after filling. Even with stock Indulgence Atty's. To prevent leakage, you have to build wider than the airflow holes, make sure none of your wick is touching the airflow holes, and make sure to fill the tank with the airflow closed. After filling, it is recommended to flip the tank upside down for ten minutes to create a vacuum / seal that prevents leakage when you re-open. Also will leak if you fill to top. Bottom line? This thing leaks all over more often than not.
Mike, would you say when wicked properly because of those juice channels that this wicks a bit faster than the Crius? I love my Crius tanks, but ability to build more and potential faster wicking, I'm curious about. I've noticed my Crius struggles just a bit when my high VG juice gets a bit cold, which I'm not holding against it, but wondering if this could solve that with those juice channels.
HEY MIKE I ENJOY YOUR REVIEWS, like the joytech thirty watt mod u just review would like to win thanks joytecy for the chance to WIN 🙂
Looks like something I might have to pick this one up! Love the coupon code love saving money!
ive lost faith in indulgence … there last few showings have been poop in my opinion, i only watched this video to feed my erection..omg mikes voice lol 😉
monster tank dammit, i think this tank is better than crius and uwell (for me)
I exchanged mine for the Zephyrus v2. The stock coil head separated on me in my pocket and I was not happy. Both coils that came with it had the problem. I bought it strictly for the coils because I already have the MT Rta. Indulgence screwed this one up.
I want that lava box! too much for my vape wallet
Great review. Think I will pick this one up.
Don't know if I got a bad couple of coils that came with it, but I am not getting much vapor at all even with the air flow wide open. Changed out to the other coil that came with it…the same issue! Sure hope when I try the build deck, it improves. So far, very disappointed.
Great review Mike. Just picked this up. Followed your wicking tutorial to a T; NO LEAKS. 3mm coils are not gonna fit. Don't waste your time folks. They are needed anyway. I have dual fused claptons in mine. 26g clapped with 36g wrapped around a 2mm driver. BARELY fit. My coils are hugging the post. Probably 1mm to .5mm of clearance between. This tank THROWS CLOUDS!!! The RBA versus the pre-made coils is no contest. RBA all DAY. Wish I had copped this prior to the TFV IV mini. #hitthatshit #bestwickingtutorial
can anyone give me an idea on the coil lifespan of the replacement
Mike, if for some reason you don't get the rba section wicking right and you have to tear it down how are you dealing with the juice in the tank? watching you take it apart I was looking at it and was thinking it would pour the juice out and you unscrew the base from the rest of the tank if you needed to take it apart to rewick.
Hi mike nice review, in terms of flavor would you recommend this over the crius or griffin?
Too bad wetvapes doesn't support shipping in Philippines. Sigh
Hey man, I just wanna say thank you so much for this video. I decided to get the Mutank in part due to your review. I really dig your reviews brotherman. I appreciate your opinions as they seem to be real and honest, and you seem to just be a normal guy like the rest of us. Anyway, I just wicked the rba deck on this beast the way you showed in your video and it's perfect!!! No leaking at all and it's wicking like a champ. Not a single dry hit and I've been chain vaping like a madman since I filled the tank. .3 ohms dual 24g kanthal 6 wraps at 35 watts and the flavor is off the chain. Pretty decent vapor production as well. Thanks again man, and vape the fuck on!!!
Does this still have the same problem with the screws being stripped easily, like the Mutation X MT?
I gotta get one these seems like a good deal for the price
mutank or griffin rta?
dont buy it. It will leak and dry hit alllll day. Get the griffin instead, i learned the hard way.
Just picked this up today! Loving this thing! Easy to build on for sure!
Please someone reply PLEASE!!!!!!! does anyone know the clapton coil specs? i want to copy it on my mutank rda deck so its the same as buying the replacement head and could handle 150 watts
Mike, you need to find an Al Pacino impersonator, and record him saying, "Let me hit this shit", and use it as intro 😀
Awesome tank! Building is easy and the premade coils aren't bad either after they break in. ?
In most circumstances and frequently, the tank leaks after filling. Even with stock Indulgence Atty's. To prevent leakage, you have to build wider than the airflow holes, make sure none of your wick is touching the airflow holes, and make sure to fill the tank with the airflow closed. After filling, it is recommended to flip the tank upside down for ten minutes to create a vacuum / seal that prevents leakage when you re-open. Also will leak if you fill to top. Bottom line? This thing leaks all over more often than not.
i thought the rba was a 2 post velocity style deck. how come it's different?