Mike Vapes

Ammit 25 Rta By Geek Vape – Best Single Coil Rta – Build & Wick – Mike Vapes

Facebook Comments
Tags

Related Articles

25 Comments

  1. To be honest the Ammit single coil is crap. It creates a positive air
    pressure in the tank after a few minutes of smoking and retards the
    juice flow, then the dry hits start. I bought two of them and both have
    the same problem. The dual coil Ammit is fine but the single coil is a
    total waste of money.

  2. yes this one is a leaker, no matter how it's wicked, juice leaks out of the bottom ring, if you read all the comments you will see after it is used for a while it will leak, I put a thin rubber gasket a hair wider than the base, no more leaks

  3. I’m still using a COV RST, but I wouldn’t mind this A-25 because the COV is a pain to line the coils up. Still a durable tank I’ve dropped it many times the glass hasn’t cracked.

  4. Hello, mike freakin Vapes ??❤️.
    Hi Mike yes you always rock on all your review's
    Really you do. First off I want to say that I know this review is 8 months old. But I want to purchase a RDA or RDTA. I like this one and every comment on the kylin everyone says
    It a leaker it leaks no mater how you wick the darn thing so I'm going to buy this one, but I wanted to ask you what size coil did you set up on this review on this RTA ammit 25mm.?

  5. Sir Mike freakin Vapes ?,
    Hello to you!
    Just wanted to say that I am so excited, I receive the Themis RTA tommorow brother.!
    OMG*" I WILL definitely
    Let you know my experience with the Themis.
    Thanks again for your help and advice on which one to get. TY!??????????

  6. Hello Mike

    If you have the time please help…..
    I love this tank.
    Great flavour
    Good clouds
    Low wattage = Good battery life and no over heating issues from chain vaping
    Easy to build and wick
    Good tank volume options

    Basically I fucking love this RDTA….. but lately iv been having some really annoying issues with wicking.
    I think I know what im doing and nothing has really changed with how I have been building on it.
    The problem is that a vacuum sometimes builds up which stops the juice flow and drys out my cotton even though the tank is not empty.
    Then yesterday for the 1st time the juice blurged out the airflow holes.

    I nearly sold the tank… but decided to not give up on my favourite ever.
    So I took it apart completely. Cleaned it all.
    Recoiled and rewicked it.

    This time I tried to not over fill the tank.
    It seems improved but im not sure for how long.

    Any ideas or tips please….

    John

  7. Hi Mike, would it be ok to email you something to check out and give me advise on as I am new to building and want to make sure that I have everything covered? Thanks

  8. was a cthulhu v3 user for years (dual and single) no single impresed me. got this. yep its my all day every day.

    1 point tho mike, love your reviews. love this review. with the wire cutting wtf u on about. just precut your coil like everyone else. or u install it and push it on an angle so it over extends the last lead and trim it. and rest it back to parallel position.. simple right?

  9. Hello everyone, i am using Kanthal A1 (24ga*2)+32ga (Fused Clapton), how many wraps should i do to make the best flavor and also on how many watt's i should smoke it?

  10. Biggest piece of SHIT I've ever owned since vaping.
    LEAKING LEAKING
    LEAKING…. i've tried everything. And no…its not how I'm wicking.
    Dudes at the store I bought it from couldn't get around the leaking. You
    will see all these amazing comments about it…go and google about the
    leaking and see I'm not alone. Piece of shit

  11. You can also cut the coil w/ wire cutters, then tuck that piece (just push w/ pliers) to ensure it only touches the contacts.
    Jerking it can unwind some styles of wire and that can cause probs of it's own (I know from learning the hard way).
    I love the look of this RTA though

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close
Close