Mike, this is by far, the best review of the Profile RDA on YouTube. I've watched several other reviewers, and none knew how to use the tool to bend the mesh to the correct half round. No one seemed to know how to utilize the cotton or how to trim it. None truly understood how revolutionary the spring system was. One reviewer said the center spring section was ceramic, and it does not look ceramic to me. At any rate, by you spending a week or two with the product, you make it very evident that reviewers should not do reviews out if the mailbox. Once a person buys the retail version, they find out, through trial and error, what works. If the buyer goes back and watches the hasty reviews, those reviewers look like they don't know what they are doing and they appear to fumble through the review. Thank you so much for taking your time, and showing people how things are done correctly! Much Vapor L <3 V E, beary
Got my Profile RDA a week ago and for you guys that still want to buy one here are my Pro's/Cons – Please note peoples taste differs. But to me this RDA has been Hyped way to far, its not as great as everyone makes it out to be:
First Con – Wicking this RDA is not as simple as it looks, I burnt 3 Wicks cause they didn't completely touch the Mesh Coil – It has to be very Tight against that mesh but at the same time can't be too dense cause the wick needs to get saturated. Took me 5 builds
2nd Con – This Wick dries very quickly and you have to sqounk fairly regularly to keep this 2 Tons of wick wet. Once fully saturated you will be lucky if you get 4-5 good puffs from it before squonking again.
3rd Con – Not very Deep Juice well for the amount of wick.
4th Con – Everyone is telling you wow the flavor is great, well NOT for me, I was very disappointing in the Profile to be honest. The flavor on my Digiflavor DROP with dual Ni80 24 Gage 6 wraps Reading 0.20 Coils is really almost 20 times better with rich distinct flavor.
Pro – Very smooth vape with good airflow.
Unfortunately to my opinion a lot of reviewers make this product to be great when in fact mine after a week of buying it is just sitting on the shelf.
Oh MOH! This isn’t for baby vaping! I almost killed myself on the inhale. This RDA is a cloud machine. Great flavor, but I’m not ready for this beast yet.
Mike where can I find that wooden tool you are using to help you build from. I need one of these as I don’t like building off my mod. Thanks in advance bro! Love the videos!
This is the pinnacle of vaping products it is that good, you have to experience yourself. There also are nexmesh designed for this rda it should further increase the absolute crazy performance. Flavors with this rda mesh are good as it possible can and chuggs huge cloudes under 60w this is the pinnacle and gamechanger
Does this rda work with Vaporesso Swag ( Talking about it being 24mm )? If no , then what mod should i get that is around 40~50$ that is considered good and works with the profile rda ? P.S. ( I prefer stick mods when using RDAs, but just say what you think is best ) Thank you in advance ^_^
So he used the Dovpo Topside for one of the RDAs; does anyone have any opinions on that particular mod? I've heard it's really good for squonking and for filling, but I don't know anything about the features other than it has variable wattage and the standard box mod options.
Let me start off by saying great honest video, I liked and subscribed!
Profile RDA X Aspire Feedlink Revvo Mod. Noooiiiice, nexMesh vastly improves flavor and vapor production. Revvo runs on a single 18650, though out my work day i can nearly chain vape on it and be good by time i'm home in a standard 8 hour work day. With my sub ohm i would burn two 18650's though the work day, i am at 2 batteries less on power consumption, and yeah couple less batts i gotta carry around.
The cotton cuts are severely simple on how i go about it, and don't have to utilize the spare spring for pressure. I virtually use the entire length of the cotton, i fray out the ends of the cotton like normal. i "V" cut the ends so the bottom of "V" pointing towards my self. Tuck the tip of the "V" of cotton into the well first making a plume, then work the tool to tuck in the cotton back and forth between terminals.
Pro – This technique is that the juice stays nice and tight in the cotton and fewer less squonks due to the cotton being a bit tighter without cotton fray or collapse.
Con – risk of breaking (REUSED) mesh coil due to pressure.
ProCon – Pro Using near to all of WoToFo 6mm cotton strands – Con Using more of off brand cotton
I am sure many people have their ways about this RDA by now, I felt i would voice my way may help or help my self though vape community.
Just bought this rda and used the cotton provided, my juice will not come up through the enter cotton like that at all, I don't get a saturated at all,just dry and flavor less, as a dropper it's amazing ,could thicker vg be the issue? Or maybe the cotton to tight because it's hard to squonk, I gotta really press the bottle
This rda is my favorite. I use vandy vape SS mesh in it and it lasts a 5 days to a week before I have to maintain it. My regular fused Clapton SS coils go about 2 days on a fresh build and then I have to clean and rewick everyday. The flavor is awesome and i dont have to fiddle with it anywhere near as much. The atomizer stays cool and doesn't sweat on my mod at all. It's going to take one hell of a rda to knock this one out of my top spot.
So to use this one i need an Squonk Mod? I have an Triade DNA250c… (edit: i was searching and the regular 510 that comes with work with a non squonk mod).
Mike, this is by far, the best review of the Profile RDA on YouTube. I've watched several other reviewers, and none knew how to use the tool to bend the mesh to the correct half round. No one seemed to know how to utilize the cotton or how to trim it. None truly understood how revolutionary the spring system was. One reviewer said the center spring section was ceramic, and it does not look ceramic to me. At any rate, by you spending a week or two with the product, you make it very evident that reviewers should not do reviews out if the mailbox. Once a person buys the retail version, they find out, through trial and error, what works. If the buyer goes back and watches the hasty reviews, those reviewers look like they don't know what they are doing and they appear to fumble through the review. Thank you so much for taking your time, and showing people how things are done correctly!
Much Vapor L <3 V E, beary
Cant wait for mine and my purple topside to get here. Can u burn and rinse the mesh to clean like a reg coil ?
Hi, what is a use of juice? I am looking for some RDA with small usuage as I do not eant to juice it all the time. Thans for answer!
Got my Profile RDA a week ago and for you guys that still want to buy one here are my Pro's/Cons – Please note peoples taste differs. But to me this RDA has been Hyped way to far, its not as great as everyone makes it out to be:
First Con – Wicking this RDA is not as simple as it looks, I burnt 3 Wicks cause they didn't completely touch the Mesh Coil – It has to be very Tight against that mesh but at the same time can't be too dense cause the wick needs to get saturated. Took me 5 builds
2nd Con – This Wick dries very quickly and you have to sqounk fairly regularly to keep this 2 Tons of wick wet. Once fully saturated you will be lucky if you get 4-5 good puffs from it before squonking again.
3rd Con – Not very Deep Juice well for the amount of wick.
4th Con – Everyone is telling you wow the flavor is great, well NOT for me, I was very disappointing in the Profile to be honest. The flavor on my Digiflavor DROP with dual Ni80 24 Gage 6 wraps Reading 0.20 Coils is really almost 20 times better with rich distinct flavor.
Pro – Very smooth vape with good airflow.
Unfortunately to my opinion a lot of reviewers make this product to be great when in fact mine after a week of buying it is just sitting on the shelf.
I have the Profile on a OBS Cube and it's awesome! ??
Love the review Mike! Got both the Topside and the Profile on order?.
Just picked one up and simply put, it is hands down by far the best vaping experience I’ve had
Oh MOH! This isn’t for baby vaping! I almost killed myself on the inhale. This RDA is a cloud machine. Great flavor, but I’m not ready for this beast yet.
Just ordered two of these. Great review thanks
My mesh keeps lighting on fire after vaping on it for 2 days. I push the cotton back up but it just doesn’t help. Burnt hits and flaming red mesh.
Mike where can I find that wooden tool you are using to help you build from. I need one of these as I don’t like building off my mod. Thanks in advance bro! Love the videos!
This is the pinnacle of vaping products it is that good, you have to experience yourself. There also are nexmesh designed for this rda it should further increase the absolute crazy performance. Flavors with this rda mesh are good as it possible can and chuggs huge cloudes under 60w this is the pinnacle and gamechanger
Does this rda work with Vaporesso Swag ( Talking about it being 24mm )? If no , then what mod should i get that is around 40~50$ that is considered good and works with the profile rda ?
P.S. ( I prefer stick mods when using RDAs, but just say what you think is best )
Thank you in advance ^_^
So he used the Dovpo Topside for one of the RDAs; does anyone have any opinions on that particular mod? I've heard it's really good for squonking and for filling, but I don't know anything about the features other than it has variable wattage and the standard box mod options.
He brushed the shit out of that cotton.. like it was Santa's beard! ?
Nice video I like the tutorial on the set ups, I have purchased the same set up. Thumbs up for you.
I just have a quick question, how long roughly do the mesh coils last before needing changed? Hope to hear back from you, thanks.
Really nice review and quality looking RDA too.
Let me start off by saying great honest video, I liked and subscribed!
Profile RDA X Aspire Feedlink Revvo Mod.
Noooiiiice, nexMesh vastly improves flavor and vapor production.
Revvo runs on a single 18650, though out my work day i can nearly chain vape on it and be good by time i'm home in a standard 8 hour work day.
With my sub ohm i would burn two 18650's though the work day, i am at 2 batteries less on power consumption, and yeah couple less batts i gotta carry around.
The cotton cuts are severely simple on how i go about it, and don't have to utilize the spare spring for pressure.
I virtually use the entire length of the cotton, i fray out the ends of the cotton like normal.
i "V" cut the ends so the bottom of "V" pointing towards my self.
Tuck the tip of the "V" of cotton into the well first making a plume, then work the tool to tuck in the cotton back and forth between terminals.
Pro – This technique is that the juice stays nice and tight in the cotton and fewer less squonks due to the cotton being a bit tighter without cotton fray or collapse.
Con – risk of breaking (REUSED) mesh coil due to pressure.
ProCon – Pro Using near to all of WoToFo 6mm cotton strands
– Con Using more of off brand cotton
I am sure many people have their ways about this RDA by now, I felt i would voice my way may help or help my self though vape community.
Can i use it only as an RDA not RSA ? i mean with non Squonk mod ?
Black mod name?
can i use this rda with a normal ( i mean no-squank) mode ? is there any screw in the box other than with hole?
Wasted too much cotton the way you done it.
Just bought this rda and used the cotton provided, my juice will not come up through the enter cotton like that at all, I don't get a saturated at all,just dry and flavor less, as a dropper it's amazing ,could thicker vg be the issue? Or maybe the cotton to tight because it's hard to squonk, I gotta really press the bottle
This rda is my favorite. I use vandy vape SS mesh in it and it lasts a 5 days to a week before I have to maintain it. My regular fused Clapton SS coils go about 2 days on a fresh build and then I have to clean and rewick everyday. The flavor is awesome and i dont have to fiddle with it anywhere near as much. The atomizer stays cool and doesn't sweat on my mod at all. It's going to take one hell of a rda to knock this one out of my top spot.
So to use this one i need an Squonk Mod? I have an Triade DNA250c… (edit: i was searching and the regular 510 that comes with work with a non squonk mod).