bought from gearbest, took 2 weeks – defective upon arrival. no airflow. took the air flow ring off all holes open, no air flow. Adjusting the ring makes no difference, the airflow is completely blocked.
i bought one through gearbest and there is no air flow coming down the chimney even with the air flow ring completely off. I finally got it apart, took the glass off and then hit it with a hammer. I guess the airflow at the top is machine pressed to the chimney, it was worth a try. Oula! Air flow. This thing isn't made very well. of course i had trouble screwing it back together after all that messing around with pliers but it's finally usable. You guys are NO HELP and a girl had to figure this out.
Hello Mike, I haven't seen any OBS Engine MTL review. Hope that you can do some review of it soon. I did bought one and I guess it's a great MTL RTA. I bought the Ammit MTL but I think, the engine is waaaayyy better than Ammit. ?
I just got this tank and put in the 1 ohm coil that came along with it and after priming it just gurgles and spits. I rewicked it and all it does is gurgle and spit. I am using a 70/30 VG/PG juice so I just can't figure out why does it just gurgle and spit. Tried from 10W to 30. Any pointers anyone?
…und du merkst nicht das oben eine Dichtung fehlt. Das zeigt mir das du dich Null mit der Dampfe beschäftigt hast. Die mitgelieferte Coil rein 5x genuckelt und das wars. Schnell noch Geekvape hypen und die Welt ist schön. (Ironie aus)
Ammit ist überhaupt nicht zu empfehlen. Meiner Meinung nach nichts für MTL. Das Bohrungskonzept der Airflow im Deck passt nicht.
Is anyone else facing airflow inconsistency with this atty? I have two and both are quite tight sometimes but then become extremely airy at the first hole. Can't figure out why. Maybe need to change the seals, but those don't come in the packs out there. Trying to find those thinner seals. Other than that I have no clue why it is all possessed. Any ideas?
Love the Ammit easiest tank to recoil and great vape and large tank… but EVERY time I refill as you did in the vid, it gets flooded. I blow out about .25 mil from the d/t to clear the coil/base… WHY??????
if you have to pick between savour and this which one you will choose ?
bought from gearbest, took 2 weeks – defective upon arrival. no airflow. took the air flow ring off all holes open, no air flow. Adjusting the ring makes no difference, the airflow is completely blocked.
who wins the ammit mtl rta or the galaxies rdta?
OMG it looks gorgeous. Will go for the combination of ammit mtl rta with the obs cube as well. Great reviews like always!!!
Name of the mod?
Got one very disappointed not true MTL at all
Geekvape is a very good factory, so i think i buy one .
got 2 Ammit 25 and i love it .
nice review, keep going
Bye tc buddy.
#VAPE ON ? ?
i bought one through gearbest and there is no air flow coming down the chimney even with the air flow ring completely off. I finally got it apart, took the glass off and then hit it with a hammer. I guess the airflow at the top is machine pressed to the chimney, it was worth a try. Oula! Air flow. This thing isn't made very well. of course i had trouble screwing it back together after all that messing around with pliers but it's finally usable. You guys are NO HELP and a girl had to figure this out.
It gurgled at first, so I rewicked it with more cotton. Now it's gold. Flavor is about the same as my Beserker.
Where's my free sample Mike ??
Hello Mike, I haven't seen any OBS Engine MTL review. Hope that you can do some review of it soon. I did bought one and I guess it's a great MTL RTA. I bought the Ammit MTL but I think, the engine is waaaayyy better than Ammit. ?
#Mike Vape … between ammet and berserker which one you prefer?
The King of matchy matchy. I'm buying this exact setup! Thanks for the review my man!
I just got this tank and put in the 1 ohm coil that came along with it and after priming it just gurgles and spits. I rewicked it and all it does is gurgle and spit. I am using a 70/30 VG/PG juice so I just can't figure out why does it just gurgle and spit. Tried from 10W to 30. Any pointers anyone?
Is it suitable for aspire cygnet
Imagine this with only a bottom airflow hole in the chamber and a GTA style wickig system
After seeing this i ordered that exact mod and tank
…und du merkst nicht das oben eine Dichtung fehlt. Das zeigt mir das du dich Null mit der Dampfe beschäftigt hast. Die mitgelieferte Coil rein 5x genuckelt und das wars. Schnell noch Geekvape hypen und die Welt ist schön.
(Ironie aus)
Ammit ist überhaupt nicht zu empfehlen. Meiner Meinung nach nichts für MTL. Das Bohrungskonzept der Airflow im Deck passt nicht.
Is anyone else facing airflow inconsistency with this atty? I have two and both are quite tight sometimes but then become extremely airy at the first hole. Can't figure out why. Maybe need to change the seals, but those don't come in the packs out there. Trying to find those thinner seals. Other than that I have no clue why it is all possessed. Any ideas?
love single coil better have a hard time with
putting in two coils.
Told MVPro you sent us there SIX ( YEP 6 ) ordered Hubs is now a vaper also so HAPPY HOME! Thank you Mike !
Love the Ammit easiest tank to recoil and great vape and large tank… but EVERY time I refill as you did in the vid, it gets flooded. I blow out about .25 mil from the d/t to clear the coil/base… WHY??????
I couldn't even get the top to screw down on this thing after I built a coil for it.
Welcome to cancer!
Прикольный обзорщик ^_^^_^^_^