hello guys i know i am late but bought my obs engine, wick exactly like mike but i get pop up sounds like fire crakers lol… got clapton coils running on .48 as the coils they supplied was throwing lots of juice in my mouth. Can anyone help me please!!!
Con- Every time you fill if you don't keep the tank 100% vertical juice comes out of the juice fill hole and works its way around the whole pull up fill top when filling then oozes out a bit when you shut it. A paper towel is needed if your neat about things almost every time… Pretty noticeable con to miss IMHO.
This is still my favorite RTA. I have the GeekVape Zeus as well as the original Pharaoh and the OBS Engine STILL takes the cake on all of my RTA's. Great flavor, ZERO leaks and thick dense clouds.
A shout from across the pond I've just been given one of these as a starter from my local vape shop. They also offer a build and show you how to service. Thanks for your time and videos.
Like to see how the 3 air holes at the top goes into the 2 channels to the coil, before I bought this I thought the air flow would be direct into the channel but it’s not, so technically the airflow goes against itself if u know what I mean
Had the mini for a few months now, looked up this vid to help figure out how to fully disassemble it. I love this tank so much I've ordered the nano as well. One thing about it though is he installs horizontal coils this vid. I've found the deck is perfect for vertical coil builds, and I seem to get better flavor and vapor out of them. Just thought I'd share.
I wouldn't love to find a obs engine I can't find them on any website in the USA I really don't wanna order it from China it will take a month just to get to me
Just got mine today. Took me a couple tries to get the coils in the right spot (ohms to low and short reading on mod) and had to re-wick it, I was a little light. But dang once I got her dialed in I love it! No leaking, good clouds and if your wick is good, great flavor. Liking your reviews, I try to watch as many as I can. Keep up the good work
just ordered mine, I was using The Troll for a few months and I love it, the wicking design while "good" is not the greatest, they should have used larger longer screws that give enough pressure with no chance of stripping and not use peek insulator (have not melted mine, but is def not something they should have used) the wicking is too easy to not have enough (leak like a sive) or too much (dry) it is also very juice hungry, so I was looking and looking and looking for something that was a bit better, this one seems to fit the bill in virtually every regard, and having the "cap" attached to it when refill is a good thing compared to having to suck on the cap when you refill it or find a place to sit it down (both of which suck)
the one thing The Troll has over almost all RBA or tanks in general is the ability to take bottom off to change coils or wick and not have to worry about the glass coming off and dumping the entire tank and can come FULLY apart so overall it is a "good tank" but the wicking is so so compared to what it could have been (more available space to cram the wick tails in vs fighting with them 3mm give or take is really not much when the hole is close to the coil mounting bar but it does work more so with cotton than it does with rayon (which I am now using as vastly prefer its "lack" of flavor after about 1/4 tank and more or less instant flavor changes)
I have used 3.5 mm 9 wrap ID kanthal 26 as well as 10 wrap 28g on it it handled it well enough and even tried dual strand and triple strand just to see and it still worked well enough (though those stupid dinky screws they use leave much to be desired)
big baby beast, The Troll, Goblin v2, aspire something or other, and a few others as well, so far The Troll has been my favorite, this looks like it will hopefully be my favorite (and hopefully last one) that I ever buy ^.^
anyways looking forward to my OBS Engine once it comes in 🙂 cheers
I know I'm a little late to this party but great video Mike! I bought one after watching your video and I'm wondering what you would say is a good flavor build for this tank? I'd like to spin some wire before it comes in! Thanks again Mike!
I ordered this RDTA based on this review, however I found the following issues. The wicking needs to fill the holes, which requires a minimum 2.5 diameter for the coils, otherwise you get a very wet, spitting vape. But the I found velocity style desk and the posts are so small that the biggest I can wind my coils is to fit was 2mm. So far this has worked out for me, I'll stick with my trusty Limitless iJoy RDTA.
I just bought one yesterday and so far I'm loving it. Not a big rta user but i can say it is awesome, I just had a hard time doing my wicking since I'm used to rda wicking.
hello guys i know i am late but bought my obs engine, wick exactly like mike but i get pop up sounds like fire crakers lol… got clapton coils running on .48 as the coils they supplied was throwing lots of juice in my mouth. Can anyone help me please!!!
I get a lot of spit back on this rta
Con- Every time you fill if you don't keep the tank 100% vertical juice comes out of the juice fill hole and works its way around the whole pull up fill top when filling then oozes out a bit when you shut it. A paper towel is needed if your neat about things almost every time… Pretty noticeable con to miss IMHO.
Is it safe on mech mod ?
I own two of these. The tank that finally ended my quest. It's the bomb.
Can you make a wicking video for this atomizer? Ty.
all top airflow have no leak.
I always have dry hits and my cotton lasts for about 2 hrs after one fill. Please help!
mike. please help me. which one's have better flavor ? Bravo RTA or Engine 25 RTA? for daily vape. i really need your recomendation
This is still my favorite RTA. I have the GeekVape Zeus as well as the original Pharaoh and the OBS Engine STILL takes the cake on all of my RTA's. Great flavor, ZERO leaks and thick dense clouds.
Mike I heard this tank doesn't leak, do you have any experience with it? Thanks and awesome review as always.
A shout from across the pond
I've just been given one of these as a starter from my local vape shop. They also offer a build and show you how to service.
Thanks for your time and videos.
Like to see how the 3 air holes at the top goes into the 2 channels to the coil, before I bought this I thought the air flow would be direct into the channel but it’s not, so technically the airflow goes against itself if u know what I mean
Hi ?
Had the mini for a few months now, looked up this vid to help figure out how to fully disassemble it. I love this tank so much I've ordered the nano as well. One thing about it though is he installs horizontal coils this vid. I've found the deck is perfect for vertical coil builds, and I seem to get better flavor and vapor out of them. Just thought I'd share.
I wouldn't love to find a obs engine I can't find them on any website in the USA I really don't wanna order it from China it will take a month just to get to me
Just got mine today. Took me a couple tries to get the coils in the right spot (ohms to low and short reading on mod) and had to re-wick it, I was a little light. But dang once I got her dialed in I love it! No leaking, good clouds and if your wick is good, great flavor. Liking your reviews, I try to watch as many as I can. Keep up the good work
just ordered mine, I was using The Troll for a few months and I love it, the wicking design while "good" is not the greatest, they should have used larger longer screws that give enough pressure with no chance of stripping and not use peek insulator (have not melted mine, but is def not something they should have used) the wicking is too easy to not have enough (leak like a sive) or too much (dry) it is also very juice hungry, so I was looking and looking and looking for something that was a bit better, this one seems to fit the bill in virtually every regard, and having the "cap" attached to it when refill is a good thing compared to having to suck on the cap when you refill it or find a place to sit it down (both of which suck)
the one thing The Troll has over almost all RBA or tanks in general is the ability to take bottom off to change coils or wick and not have to worry about the glass coming off and dumping the entire tank and can come FULLY apart so overall it is a "good tank" but the wicking is so so compared to what it could have been (more available space to cram the wick tails in vs fighting with them 3mm give or take is really not much when the hole is close to the coil mounting bar but it does work more so with cotton than it does with rayon (which I am now using as vastly prefer its "lack" of flavor after about 1/4 tank and more or less instant flavor changes)
I have used 3.5 mm 9 wrap ID kanthal 26 as well as 10 wrap 28g on it it handled it well enough and even tried dual strand and triple strand just to see and it still worked well enough (though those stupid dinky screws they use leave much to be desired)
big baby beast, The Troll, Goblin v2, aspire something or other, and a few others as well, so far The Troll has been my favorite, this looks like it will hopefully be my favorite (and hopefully last one) that I ever buy ^.^
anyways looking forward to my OBS Engine once it comes in 🙂 cheers
I know I'm a little late to this party but great video Mike! I bought one after watching your video and I'm wondering what you would say is a good flavor build for this tank? I'd like to spin some wire before it comes in! Thanks again Mike!
I'm gonna start calling you vaping comedian 🙂
does somebody know the size of the allen tool? mine was not included when i bought it
Some issues were spit back and a lot of flooding when you start to refill. But glad i'm glad, iv'e figured it out! Thanks for the review.
4:39 Mini is 23 mm , not 22 .
I ordered this RDTA based on this review, however I found the following issues. The wicking needs to fill the holes, which requires a minimum 2.5 diameter for the coils, otherwise you get a very wet, spitting vape. But the I found velocity style desk and the posts are so small that the biggest I can wind my coils is to fit was 2mm. So far this has worked out for me, I'll stick with my trusty Limitless iJoy RDTA.
I just bought one yesterday and so far I'm loving it. Not a big rta user but i can say it is awesome, I just had a hard time doing my wicking since I'm used to rda wicking.